Now that U-Boot works fine with highmem enabled, there is no need to tell users to disable highmem.
Signed-off-by: Tuomas Tynkkynen tuomas.tynkkynen@iki.fi --- doc/README.qemu-arm | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/doc/README.qemu-arm b/doc/README.qemu-arm index 6f6f07d8bb..260165638a 100644 --- a/doc/README.qemu-arm +++ b/doc/README.qemu-arm @@ -39,13 +39,12 @@ Running U-Boot The minimal QEMU command line to get U-Boot up and running is:
- For ARM: - qemu-system-arm -machine virt,highmem=off -bios u-boot.bin + qemu-system-arm -machine virt -bios u-boot.bin
- For AArch64: - qemu-system-aarch64 -machine virt,highmem=off -cpu cortex-a57 -bios u-boot.bin + qemu-system-aarch64 -machine virt -cpu cortex-a57 -bios u-boot.bin
-The 'highmem=off' parameter to the 'virt' machine is required for PCI to work -in U-Boot. Also, for some odd reason qemu-system-aarch64 needs to be explicitly +Note that for some odd reason qemu-system-aarch64 needs to be explicitly told to use a 64-bit CPU or it will boot in 32-bit mode.
Additional peripherals that have been tested to work in both U-Boot and Linux