6 Feb
2004
6 Feb
'04
8:40 a.m.
In message 20040206040100.89537.qmail@web40407.mail.yahoo.com you wrote:
I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.
...
Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?
No, you cannot, unless you modify the processor :-)
The MPC8xx will always boot from the device attached to CS0.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Anyone who isn't confused here doesn't really know what's going on.