On Saturday 22 December 2007, shami Allam wrote:
After booting my target i get the following message..
I2C:ready DRAM:16MB FLASH:2MB In: serial Out:serial Err:serial Net: ppc_4xx_eth0 => and after that if i say => mii info PHY 0x01: OUI = 0x80017, Model = 0x09, Rev = 0x00, 10baseT, HDX
And is this correct? Do you have a 10MBit connection?
=> setenv ipaddr 192.168.13.248 => ping 192.168.13.248
So you try to ping to yourself here. This does not work. You have to ping to a different target (PC).
After this if i ping it's not pinging self and also the host ip(192.168.13.240). Can you help me out what could be the problem..... => mii read 0x01<PHY Addr> 0x01<register val> when i read the PHY 0x01 register following is the value 0x7849. This value show that "No Link". why so. PHY chip i am using DP83848I
Possibly a PHY configuartion problem. Did you check if you soldered the correct resistors and condensators? Is the power-supply ok?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================