[U-Boot] [PATCH] fsl/sleep: updated the deep sleep framework for QorIQ platforms

21 Nov 2014

From: Tang Yuantian Yuantian.Tang@freescale.com
With the introducing of generic board and ARM-based cores, current
deep sleep framework doesn't work anymore.
This patch will convert the current framework to adapt this change.
Basically it does:
1. Converts all the Freescale's DDR driver to support deep sleep.
2. Added basic framework support for ARM-based and PPC-based
cores separately.
Signed-off-by: Tang Yuantian Yuantian.Tang@freescale.com
---
 board/freescale/common/Makefile        |  6 +++
 board/freescale/common/arm_sleep.c     | 95 ++++++++++++++++++++++++++++++++++
 board/freescale/common/mpc85xx_sleep.c | 88 +++++++++++++++++++++++++++++++
 board/freescale/common/sleep.h         | 21 ++++++++
 drivers/ddr/fsl/arm_ddr_gen3.c         | 45 +++++++++++++---
 drivers/ddr/fsl/fsl_ddr_gen4.c         | 44 ++++++++++++++--
 drivers/ddr/fsl/mpc85xx_ddr_gen3.c     | 67 +++++++++---------------
 include/fsl_ddr_sdram.h                | 12 +++--
 8 files changed, 322 insertions(+), 56 deletions(-)
 create mode 100644 board/freescale/common/arm_sleep.c
 create mode 100644 board/freescale/common/mpc85xx_sleep.c
 create mode 100644 board/freescale/common/sleep.h

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 32b5a3b..d1b6e3c 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -36,6 +36,12 @@ endif
obj-$(CONFIG_FSL_DIU_CH7301)	+= diu_ch7301.o
+ifdef CONFIG_ARM
+obj-$(CONFIG_DEEP_SLEEP)		+= arm_sleep.o
+else
+obj-$(CONFIG_DEEP_SLEEP)		+= mpc85xx_sleep.o
+endif
+
 obj-$(CONFIG_FSL_DCU_SII9022A)    += dcu_sii9022a.o
obj-$(CONFIG_MPC8541CDS)	+= cds_pci_ft.o
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
new file mode 100644
index 0000000..8edf878
--- /dev/null
+++ b/board/freescale/common/arm_sleep.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
+#error " Deep sleep needs non-secure mode support. "
+#else
+#include <asm/secure.h>
+#endif
+#include <asm/armv7.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_LS102XA)
+#include <asm/arch/immap_ls102xa.h>
+#endif
+
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+	if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
+		return 1;
+
+	return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+	gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+	u64 *src, *dst;
+	int i;
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+	/* get the address of ddr date from SPARECR3 */
+	src = (u64 *)in_le32(&scfg->sparecr[2]);
+	dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+	for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+		*dst++ = *src++;
+
+	flush_dcache_all();
+}
+
+static void dp_resume_prepare(void)
+{
+	dp_ddr_restore();
+	board_sleep_prepare();
+	armv7_init_nonsec();
+	cleanup_before_linux();
+}
+
+int fsl_dp_resume(void)
+{
+	u32 start_addr;
+	void (*kernel_resume)(void);
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+	if (!is_warm_boot())
+		return 0;
+
+	dp_resume_prepare();
+
+	/* Get the entry address and jump to kernel */
+	start_addr = in_le32(&scfg->sparecr[1]);
+	debug("Entry address is 0x%08x\n", start_addr);
+	kernel_resume = (void (*)(void))start_addr;
+	secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
+
+	return 0;
+}
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
new file mode 100644
index 0000000..f924e7f
--- /dev/null
+++ b/board/freescale/common/mpc85xx_sleep.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/immap_85xx.h>
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
+		return 1;
+
+	return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+	gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+	volatile u64 *src, *dst;
+	int i;
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+	/* get the address of ddr date from SPARECR3 */
+	src = (u64 *)in_be32(&scfg->sparecr[2]);
+	dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+	for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+		*dst++ = *src++;
+
+	flush_dcache();
+}
+
+static void dp_resume_prepare(void)
+{
+	dp_ddr_restore();
+
+	board_sleep_prepare();
+
+	l2cache_init();
+#if defined(CONFIG_RAMBOOT_PBL)
+	disable_cpc_sram();
+#endif
+	enable_cpc();
+}
+
+int fsl_dp_resume(void)
+{
+	u32 start_addr;
+	void (*kernel_resume)(void);
+	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+	if (!is_warm_boot())
+		return 0;
+
+	dp_resume_prepare();
+
+	/* Get the entry address and jump to kernel */
+	start_addr = in_be32(&scfg->sparecr[1]);
+	debug("Entry address is 0x%08x\n", start_addr);
+	kernel_resume = (void (*)(void))start_addr;
+	kernel_resume();
+
+	return 0;
+}
diff --git a/board/freescale/common/sleep.h b/board/freescale/common/sleep.h
new file mode 100644
index 0000000..c26c542
--- /dev/null
+++ b/board/freescale/common/sleep.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SLEEP_H
+#define __SLEEP_H
+
+#define DCFG_CCSR_CRSTSR_WDRFR	(1 << 3)
+#define DDR_BUFF_LEN			128
+
+/* determine if it is a wakeup from deep sleep */
+bool is_warm_boot(void);
+
+/* disable console output */
+void fsl_dp_disable_console(void);
+
+/* clean up everything and jump to kernel */
+int fsl_dp_resume(void);
+#endif
diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c
index 59f2fd6..c139da6 100644
--- a/drivers/ddr/fsl/arm_ddr_gen3.c
+++ b/drivers/ddr/fsl/arm_ddr_gen3.c
@@ -92,7 +92,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
    ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
    ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-	ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
    ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
    ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
    ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -105,9 +104,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
    ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
    ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-	ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-	ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
    ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
    ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
    ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -128,7 +124,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
    ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
    ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-	ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		ddr_out32(&ddr->sdram_cfg_2,
+			  regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+		ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+		ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+		/* DRAM VRef will not be trained */
+		ddr_out32(&ddr->ddr_cdr2,
+			  regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+	} else
+#endif
+	{
+		ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+		ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+		ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+		ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+	}
    ddr_out32(&ddr->err_disable, regs->err_disable);
    ddr_out32(&ddr->err_int_en, regs->err_int_en);
    for (i = 0; i < 32; i++) {
@@ -167,8 +180,20 @@ step2:
    udelay(500);
    asm volatile("dsb sy;isb");
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		/* enter self-refresh */
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+		temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+		/* do board specific memory setup */
+		board_mem_sleep_setup();
+
+		temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+	} else
+#endif
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
    /* Let the controller go */
-	temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
    ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
    asm volatile("dsb sy;isb");
@@ -211,4 +236,12 @@ step2:
if (timeout <= 0)
    	printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		/* exit self-refresh */
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+		temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+	}
+#endif
 }
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index e024db9..a3c01e7 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -103,7 +103,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
    ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
    ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
-	ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
    ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
    ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
    ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
@@ -124,8 +123,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
    ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
    ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
-	ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-	ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
    ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
 #ifndef CONFIG_SYS_FSL_DDR_EMU
    /*
@@ -147,7 +144,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
    ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
    ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-	ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		ddr_out32(&ddr->sdram_cfg_2,
+			  regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+		ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+		ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+		/* DRAM VRef will not be trained */
+		ddr_out32(&ddr->ddr_cdr2,
+			  regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+	} else
+#endif
+	{
+		ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+		ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+		ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+		ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+	}
    ddr_out32(&ddr->err_disable, regs->err_disable);
    ddr_out32(&ddr->err_int_en, regs->err_int_en);
    for (i = 0; i < 32; i++) {
@@ -187,8 +201,20 @@ step2:
    mb();
    isb();
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		/* enter self-refresh */
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+		temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+		/* do board specific memory setup */
+		board_mem_sleep_setup();
+
+		temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+	} else
+#endif
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
    /* Let the controller go */
-	temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
    ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
    mb();
    isb();
@@ -233,4 +259,12 @@ step2:
if (timeout <= 0)
    	printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		/* exit self-refresh */
+		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+		temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+	}
+#endif
 }
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
index 4d5572e..8f4d01a 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -15,8 +15,6 @@
 #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
 #endif
-DECLARE_GLOBAL_DATA_PTR;
-
 /*
  * regs has the to-be-set values for DDR controller registers
  * ctrl_num is the DDR controller number
@@ -44,16 +42,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    u32 save1, save2;
 #endif
-#ifdef CONFIG_DEEP_SLEEP
-	const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	bool sleep_flag = 0;
-#endif
-
-#ifdef CONFIG_DEEP_SLEEP
-	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
-		sleep_flag = 1;
-#endif
-
    switch (ctrl_num) {
    case 0:
    	ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
@@ -130,13 +118,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
    out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
    out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-#ifdef CONFIG_DEEP_SLEEP
-	if (sleep_flag)
-		out_be32(&ddr->sdram_cfg_2,
-			 regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-	else
-#endif
-		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
    out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
    out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
    out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -149,17 +130,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
    out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
    out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#ifdef CONFIG_DEEP_SLEEP
-	if (sleep_flag) {
-		out_be32(&ddr->init_addr, 0);
-		out_be32(&ddr->init_ext_addr, (1 << 31));
-	} else
-#endif
-	{
-		out_be32(&ddr->init_addr, regs->ddr_init_addr);
-		out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-	}
-
    out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
    out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
    out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -180,7 +150,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
    out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
    out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
    out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+	if (is_warm_boot()) {
+		out_be32(&ddr->sdram_cfg_2,
+			 regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+		out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+		out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+		/* DRAM VRef will not be trained */
+		out_be32(&ddr->ddr_cdr2,
+			 regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+	} else
+#endif
+	{
+		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+		out_be32(&ddr->init_addr, regs->ddr_init_addr);
+		out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+		out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+	}
    out_be32(&ddr->err_disable, regs->err_disable);
    out_be32(&ddr->err_int_en, regs->err_int_en);
    for (i = 0; i < 32; i++) {
@@ -400,21 +387,17 @@ step2:
    asm volatile("sync;isync");
#ifdef CONFIG_DEEP_SLEEP
-	if (sleep_flag) {
+	if (is_warm_boot()) {
    	/* enter self-refresh */
-		setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+		setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
    	/* do board specific memory setup */
    	board_mem_sleep_setup();
-	}
-#endif
-
-	/* Let the controller go */
-#ifdef CONFIG_DEEP_SLEEP
-	if (sleep_flag)
    	temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
-	else
+	} else
 #endif
    	temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
+
+	/* Let the controller go */
    out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
    asm volatile("sync;isync");
@@ -566,8 +549,8 @@ step2:
    }
 #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
 #ifdef CONFIG_DEEP_SLEEP
-	if (sleep_flag)
+	if (is_warm_boot())
    	/* exit self-refresh */
-		clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+		clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
 #endif
 }
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 5b03c14..095b33e 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -114,6 +114,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define SDRAM_CFG_2T_EN			0x00008000
 #define SDRAM_CFG_BI			0x00000001
+#define SDRAM_CFG2_FRC_SR		0x80000000
 #define SDRAM_CFG2_D_INIT		0x00000010
 #define SDRAM_CFG2_ODT_CFG_MASK		0x00600000
 #define SDRAM_CFG2_ODT_NEVER		0
@@ -163,6 +164,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
 #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
 #define DDR_CDR2_VREF_OVRD(x)	(0x00008080 | ((((x) - 37) & 0x3F) << 8))
+#define DDR_CDR2_VREF_TRAIN_EN	0x00000080
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
    (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@@ -202,6 +204,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR_ODT_120ohm	0x6
 #endif
+#define DDR_INIT_ADDR_EXT_UIA	(1 << 31)
+
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
    struct {
@@ -414,9 +418,11 @@ static int __board_need_mem_reset(void)
 int board_need_mem_reset(void)
    __attribute__((weak, alias("__board_need_mem_reset")));
-void __weak board_mem_sleep_setup(void)
-{
-}
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void);
+bool is_warm_boot(void);
+int fsl_dp_resume(void);
+#endif
/*
  * The 85xx boards have a common prototype for fixed_sdram so put the
-- 
2.1.0.27.g96db324


    

[U-Boot] [PATCH] fsl/sleep: updated the deep sleep framework for QorIQ platforms

Yuantian.Tang＠freescale.com