Kumar,
Signed-off-by: Andre Schwarzandre.schwarz@matrix-vision.de
arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
This doesn't seem quite right, the MPC837x has USB controllers.
- k
yes, it has - and it is working fine. But USB register range 0x00-0xff is reserved and hangs the CPU.
With this patch USB is working fine on at least MPC8377.
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 7a1cae7..cfead18 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -327,7 +327,7 @@ void cpu_init_f (volatile immap_t * im) im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; #endif #ifdef CONFIG_USB_EHCI_FSL -#ifndef CONFIG_MPC834x +#if !defined(CONFIG_MPC834x)&& !defined(CONFIG_MPC837x) uint32_t temp; struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR;
-- 1.7.0.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, André
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner