TI-SCI message protocol provides support for controlling of various physical cores available in SoC. In order to control which host is capable of controlling a physical processor core, there is a processor access control list that needs to be populated as part of the board configuration data.
Introduce support for the set of TI-SCI message protocol apis that provide us with this capability of controlling physical cores.
Reviewed-by: Tom Rini trini@konsulko.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- drivers/firmware/ti_sci.c | 371 +++++++++++++++++++++++++ drivers/firmware/ti_sci.h | 181 ++++++++++++ include/linux/soc/ti/ti_sci_protocol.h | 37 +++ 3 files changed, 589 insertions(+)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 1a78b7d0dc..9148126041 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -1441,6 +1441,368 @@ static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle) return ret; }
+/** + * ti_sci_cmd_proc_request() - Command to request a physical processor control + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle, + u8 proc_id) +{ + struct ti_sci_msg_req_proc_request req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_REQUEST, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_proc_release() - Command to release a physical processor control + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle, + u8 proc_id) +{ + struct ti_sci_msg_req_proc_release req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_RELEASE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_proc_handover() - Command to handover a physical processor + * control to a host in the processor's access + * control list. + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @host_id: Host ID to get the control of the processor + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle, + u8 proc_id, u8 host_id) +{ + struct ti_sci_msg_req_proc_handover req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_HANDOVER, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + req.host_id = host_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_set_proc_boot_cfg() - Command to set the processor boot + * configuration flags + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @config_flags_set: Configuration flags to be set + * @config_flags_clear: Configuration flags to be cleared. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_set_proc_boot_cfg(const struct ti_sci_handle *handle, + u8 proc_id, u64 bootvector, + u32 config_flags_set, + u32 config_flags_clear) +{ + struct ti_sci_msg_req_set_proc_boot_config req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CONFIG, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK; + req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >> + TISCI_ADDR_HIGH_SHIFT; + req.config_flags_set = config_flags_set; + req.config_flags_clear = config_flags_clear; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_set_proc_boot_ctrl() - Command to set the processor boot + * control flags + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @control_flags_set: Control flags to be set + * @control_flags_clear: Control flags to be cleared + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_set_proc_boot_ctrl(const struct ti_sci_handle *handle, + u8 proc_id, u32 control_flags_set, + u32 control_flags_clear) +{ + struct ti_sci_msg_req_set_proc_boot_ctrl req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_SET_PROC_BOOT_CTRL, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + req.control_flags_set = control_flags_set; + req.control_flags_clear = control_flags_clear; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_proc_auth_boot_image() - Command to authenticate and load the + * image and then set the processor configuration flags. + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @cert_addr: Memory address at which payload image certificate is located. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_auth_boot_image(const struct ti_sci_handle *handle, + u8 proc_id, u64 cert_addr) +{ + struct ti_sci_msg_req_proc_auth_boot_image req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_PROC_AUTH_BOOT_IMIAGE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + req.cert_addr_low = cert_addr & TISCI_ADDR_LOW_MASK; + req.cert_addr_high = (cert_addr & TISCI_ADDR_HIGH_MASK) >> + TISCI_ADDR_HIGH_SHIFT; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_get_proc_boot_status() - Command to get the processor boot status + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle, + u8 proc_id, u64 *bv, u32 *cfg_flags, + u32 *ctrl_flags, u32 *sts_flags) +{ + struct ti_sci_msg_resp_get_proc_boot_status *resp; + struct ti_sci_msg_req_get_proc_boot_status req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_GET_PROC_BOOT_STATUS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_get_proc_boot_status *) + xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + return -ENODEV; + *bv = (resp->bootvector_low & TISCI_ADDR_LOW_MASK) | + (((u64)resp->bootvector_high << + TISCI_ADDR_HIGH_SHIFT) & TISCI_ADDR_HIGH_MASK); + *cfg_flags = resp->config_flags; + *ctrl_flags = resp->control_flags; + *sts_flags = resp->status_flags; + + return ret; +} + /* * ti_sci_setup_ops() - Setup the operations structures * @info: pointer to TISCI pointer @@ -1452,6 +1814,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) struct ti_sci_dev_ops *dops = &ops->dev_ops; struct ti_sci_clk_ops *cops = &ops->clk_ops; struct ti_sci_core_ops *core_ops = &ops->core_ops; + struct ti_sci_proc_ops *pops = &ops->proc_ops;
bops->board_config = ti_sci_cmd_set_board_config; bops->board_config_rm = ti_sci_cmd_set_board_config_rm; @@ -1486,6 +1849,14 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) cops->get_freq = ti_sci_cmd_clk_get_freq;
core_ops->reboot_device = ti_sci_cmd_core_reboot; + + pops->proc_request = ti_sci_cmd_proc_request; + pops->proc_release = ti_sci_cmd_proc_release; + pops->proc_handover = ti_sci_cmd_proc_handover; + pops->set_proc_boot_cfg = ti_sci_cmd_set_proc_boot_cfg; + pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl; + pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image; + pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status; }
/** diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h index 2fc9063ff5..81591fb0c7 100644 --- a/drivers/firmware/ti_sci.h +++ b/drivers/firmware/ti_sci.h @@ -41,6 +41,15 @@ #define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d #define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+/* Processor Control Messages */ +#define TISCI_MSG_PROC_REQUEST 0xc000 +#define TISCI_MSG_PROC_RELEASE 0xc001 +#define TISCI_MSG_PROC_HANDOVER 0xc005 +#define TISCI_MSG_SET_PROC_BOOT_CONFIG 0xc100 +#define TISCI_MSG_SET_PROC_BOOT_CTRL 0xc101 +#define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE 0xc120 +#define TISCI_MSG_GET_PROC_BOOT_STATUS 0xc400 + /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses * @type: Type of messages: One of TI_SCI_MSG* values @@ -496,4 +505,176 @@ struct ti_sci_msg_resp_get_clock_freq { u64 freq_hz; } __packed;
+#define TISCI_ADDR_LOW_MASK GENMASK_ULL(31, 0) +#define TISCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32) +#define TISCI_ADDR_HIGH_SHIFT 32 + +/** + * struct ti_sci_msg_req_proc_request - Request a processor + * + * @hdr: Generic Header + * @processor_id: ID of processor + * + * Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_request { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_release - Release a processor + * + * @hdr: Generic Header + * @processor_id: ID of processor + * + * Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_release { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_handover - Handover a processor to a host + * + * @hdr: Generic Header + * @processor_id: ID of processor + * @host_id: New Host we want to give control to + * + * Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_handover { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u8 host_id; +} __packed; + +/* A53 Config Flags */ +#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN 0x00000001 +#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN 0x00000002 +#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN 0x00000004 +#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN 0x00000008 +#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32 0x00000100 + +/* R5 Config Flags */ +#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001 +#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002 +#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100 +#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200 +#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400 +#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800 +#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000 +#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000 + +/** + * struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration + * @hdr: Generic Header + * @processor_id: ID of processor + * @bootvector_low: Lower 32bit (Little Endian) of boot vector + * @bootvector_high: Higher 32bit (Little Endian) of boot vector + * @config_flags_set: Optional Processor specific Config Flags to set. + * Setting a bit here implies required bit sets to 1. + * @config_flags_clear: Optional Processor specific Config Flags to clear. + * Setting a bit here implies required bit gets cleared. + * + * Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_proc_boot_config { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags_set; + u32 config_flags_clear; +} __packed; + +/* R5 Control Flags */ +#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001 + +/** + * struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags + * @hdr: Generic Header + * @processor_id: ID of processor + * @control_flags_set: Optional Processor specific Control Flags to set. + * Setting a bit here implies required bit sets to 1. + * @control_flags_clear:Optional Processor specific Control Flags to clear. + * Setting a bit here implies required bit gets cleared. + * + * Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_proc_boot_ctrl { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 control_flags_set; + u32 control_flags_clear; +} __packed; + +/** + * struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image + * @hdr: Generic Header + * @processor_id: ID of processor + * @cert_addr_low: Lower 32bit (Little Endian) of certificate + * @cert_addr_high: Higher 32bit (Little Endian) of certificate + * + * Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_proc_auth_boot_image { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 cert_addr_low; + u32 cert_addr_high; +} __packed; + +/** + * struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status + * @hdr: Generic Header + * @processor_id: ID of processor + * + * Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_proc_boot_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/* ARMv8 Status Flags */ +#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE 0x00000001 +#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI 0x00000002 + +/* R5 Status Flags */ +#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001 +#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002 +#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004 +#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100 + +/** + * struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response + * @hdr: Generic Header + * @processor_id: ID of processor + * @bootvector_low: Lower 32bit (Little Endian) of boot vector + * @bootvector_high: Higher 32bit (Little Endian) of boot vector + * @config_flags: Optional Processor specific Config Flags set. + * @control_flags: Optional Processor specific Control Flags. + * @status_flags: Optional Processor specific Status Flags set. + * + * Response to TISCI_MSG_GET_PROC_BOOT_STATUS. + */ +struct ti_sci_msg_resp_get_proc_boot_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags; + u32 control_flags; + u32 status_flags; +} __packed; + #endif /* __TI_SCI_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index acc02d38e1..90d5053636 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -222,18 +222,55 @@ struct ti_sci_core_ops { int (*reboot_device)(const struct ti_sci_handle *handle); };
+/** + * struct ti_sci_proc_ops - Processor specific operations. + * + * @proc_request: Request for controlling a physical processor. + * The requesting host should be in the processor access list. + * @proc_release: Relinquish a physical processor control + * @proc_handover: Handover a physical processor control to another host + * in the permitted list. + * @set_proc_boot_cfg: Base configuration of the processor + * @set_proc_boot_ctrl: Setup limited control flags in specific cases. + * @proc_auth_boot_image: + * @get_proc_boot_status: Get the state of physical processor + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -pid: Processor ID + * + */ +struct ti_sci_proc_ops { + int (*proc_request)(const struct ti_sci_handle *handle, u8 pid); + int (*proc_release)(const struct ti_sci_handle *handle, u8 pid); + int (*proc_handover)(const struct ti_sci_handle *handle, u8 pid, + u8 hid); + int (*set_proc_boot_cfg)(const struct ti_sci_handle *handle, u8 pid, + u64 bv, u32 cfg_set, u32 cfg_clr); + int (*set_proc_boot_ctrl)(const struct ti_sci_handle *handle, u8 pid, + u32 ctrl_set, u32 ctrl_clr); + int (*proc_auth_boot_image)(const struct ti_sci_handle *handle, u8 pid, + u64 caddr); + int (*get_proc_boot_status)(const struct ti_sci_handle *handle, u8 pid, + u64 *bv, u32 *cfg_flags, u32 *ctrl_flags, + u32 *sts_flags); +}; + /** * struct ti_sci_ops - Function support for TI SCI * @board_ops: Miscellaneous operations * @dev_ops: Device specific operations * @clk_ops: Clock specific operations * @core_ops: Core specific operations + * @proc_ops: Processor specific operations */ struct ti_sci_ops { struct ti_sci_board_ops board_ops; struct ti_sci_dev_ops dev_ops; struct ti_sci_clk_ops clk_ops; struct ti_sci_core_ops core_ops; + struct ti_sci_proc_ops proc_ops; };
/**