On 2020/10/28 下午9:33, Jagan Teki wrote:
The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful.
Add support for it.
Cc: Stefano Babic sbabic@denx.de Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Reviewed-by: Kever Yangkever.yang@rock-chips.com
Thanks, - Kever
Changes for v4:
none
board/engicam/common/Kconfig | 8 ++++++++ board/engicam/common/Makefile | 7 +++++-- board/engicam/imx6q/Kconfig | 2 ++ board/engicam/imx6ul/Kconfig | 2 ++ 4 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 board/engicam/common/Kconfig
diff --git a/board/engicam/common/Kconfig b/board/engicam/common/Kconfig new file mode 100644 index 0000000000..38328fd5ea --- /dev/null +++ b/board/engicam/common/Kconfig @@ -0,0 +1,8 @@ +config IMX6_ENGICAM_COMMON
- bool "Engicam i.MX6 Common code"
- depends on SPL && MX6
- default y if TARGET_MX6Q_ENGICAM || TARGET_MX6UL_ENGICAM
- help
Common SPL and U-Boot proper code for Engicam i.MX6 targets.Enable it in board Kconfig if it uses i.MX6 variant Engicam boards.diff --git a/board/engicam/common/Makefile b/board/engicam/common/Makefile index b392bf6cb1..15f0eaa1ec 100644 --- a/board/engicam/common/Makefile +++ b/board/engicam/common/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0+ # Copyright (C) 2016 Amarula Solutions B.V.
-obj-y := board.o -obj-$(CONFIG_SPL_BUILD) += spl.o +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += spl.o +else +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += board.o +endif diff --git a/board/engicam/imx6q/Kconfig b/board/engicam/imx6q/Kconfig index 48eb60c09a..fab8da0e73 100644 --- a/board/engicam/imx6q/Kconfig +++ b/board/engicam/imx6q/Kconfig @@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam"
+source "board/engicam/common/Kconfig"
- endif
diff --git a/board/engicam/imx6ul/Kconfig b/board/engicam/imx6ul/Kconfig index e91dd15970..58f25d0623 100644 --- a/board/engicam/imx6ul/Kconfig +++ b/board/engicam/imx6ul/Kconfig @@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam"
+source "board/engicam/common/Kconfig"
- endif