Hello Stephan
I just checked it, and I am using v7 :) from: http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ Once it is applied I will post the patches for xilinx-ppc440-generic (mainly instantiate it in the config...)
I have tried to download an image with the dhcp command over 100 and 1000M... I have to work more on it, but it looks promising. If you need an specific test, just say it, tomorrow I will be working with the board.
Thanks again for the patch, it was very needed for u-boot.
Regards
On Thu, Dec 22, 2011 at 19:52, Stephan Linz linz@li-pro.net wrote:
Hello Recardo,
Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda Delgado:
Hello Stefan, Hello Wolfgang, Hello Michal,
I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.
OK, thanks for your efforts. Would it be possible for you to test even the latest v7 patch? There were some critical changes between v6 and v7, especially timeout regime, function pointers for plattform specific in/out accessors, and MDIO clock calculation.
-- Best regards, Stephan Linz ______________________________________________________________________________ MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start OpenDCC: http://www.li-pro.net/opendcc.phtml PC/M: http://www.li-pro.net/pcm.phtml Sourceforge: http://sourceforge.net/users/slz Gitorious: https://gitorious.org/~slz