From: Yuantian Tang andy.tang@nxp.com
Add sd and emmc bootcmd environments to facilitate the boot process.
Signed-off-by: Yuantian Tang andy.tang@nxp.com --- include/configs/ls1028aqds.h | 38 +++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index b0e9441a48..4cffd69446 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -142,19 +142,35 @@ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmcinfo; mmc dev 1; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" + #endif #endif /* __LS1028A_QDS_H */