[U-Boot] [PATCH v2 05/14] net: emaclite: Use indirect register access for rx_ping/pong

Do initialization via indirect register access.

Signed-off-by: Michal Simek michal.simek@xilinx.com ---

Changes in v2: - Fix subject to point to rx instead of tx

drivers/net/xilinx_emaclite.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index 654ad58cea3c..724b61e0b7e1 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -364,11 +364,10 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis) * RX - RX_PING & RX_PONG initialization */ /* Write out the value to flush the RX buffer */ - out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK); + out_be32(&regs->rx_ping_rsr, XEL_RSR_RECV_IE_MASK);

if (emaclite->rxpp) - out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET, - XEL_RSR_RECV_IE_MASK); + out_be32(&regs->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);

#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) out_be32(&regs->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);