I think u can check the docs folder for a readme. Based on the board info/parts and hardware strapping done u need to build a memory map and use the same.
Thanks & Regards, Vignesh Kumar B
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Diptopal Basu Sent: Thursday, December 04, 2008 2:01 PM To: u-boot@lists.denx.de Subject: [U-Boot] how do I find out the memory map for my port forat91rm9200dk
Hi ,
I am new to u boot , I compiled a u boot image ( version - u-boot-2008.10 ) with ELDK for at91rm9200dk . I need to know what the memory map is for the board . I am actually working on skyeye simulator and want to configure the skyeye.conf filw with the memory map .
Also in the boards folder in u-boot I do not see the board configuration for at91rm9200dk . However I see the header file in the header/config folder . Where are the config files for this board and how do I do a port on a board with a different memory map ?
Regards Diptopal Basu
DISCLAIMER: -----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------