Enable the DM_ETH_PHY and PHY_REALTEK now that the designware ethernet driver call eth_phy_set_mdio_bus() to assist with resetting the eth PHY during probe.
Fixes ethernet on the v1.21 hw revision of Radxa ROCK Pi E:
=> mdio list ethernet@ff540000: 1 - RealTek RTL8211F <--> ethernet@ff540000 => net list eth0 : ethernet@ff540000 86:e0:c0:ea:fa:a9 active eth1 : ethernet@ff550000 86:e0:c0:ea:fa:a8 => dhcp Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.114 (1004 ms)
Reported-by: Trevor Woerner twoerner@gmail.com Signed-off-by: Jonas Karlman jonas@kwiboo.se --- configs/rock-pi-e-rk3328_defconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig index c0375beffec3..6dda900a9b42 100644 --- a/configs/rock-pi-e-rk3328_defconfig +++ b/configs/rock-pi-e-rk3328_defconfig @@ -76,6 +76,8 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y