From: Wang Huan b18965@freescale.com
LS102xA is an ARMv7 implementation. This patch is to add basic support for LS1021ATWR board. One DDR controller DUART1 is used as the console
For the detail board information, please refer to README.
Signed-off-by: Chen Lu chen.lu@freescale.com Signed-off-by: Yuan Yao yao.yuan@freescale.com Signed-off-by: Alison Wang alison.wang@freescale.com --- Change log: v6: Fix checkpatch error. Use #define instead of magic numbers. Remove redundant codes. Add support for some commands. v5: No change. v4: Add more commit messages. v3: Fix checkpatch error. Update to Kconfig. v2: New file.
arch/arm/Kconfig | 4 + board/freescale/ls1021atwr/Kconfig | 23 ++ board/freescale/ls1021atwr/MAINTAINERS | 6 + board/freescale/ls1021atwr/Makefile | 7 + board/freescale/ls1021atwr/README | 109 ++++++++ board/freescale/ls1021atwr/ls1021atwr.c | 482 ++++++++++++++++++++++++++++++++ configs/ls1021atwr_nor_defconfig | 2 + include/configs/ls1021atwr.h | 273 ++++++++++++++++++ 8 files changed, 906 insertions(+) create mode 100644 board/freescale/ls1021atwr/Kconfig create mode 100644 board/freescale/ls1021atwr/MAINTAINERS create mode 100644 board/freescale/ls1021atwr/Makefile create mode 100644 board/freescale/ls1021atwr/README create mode 100644 board/freescale/ls1021atwr/ls1021atwr.c create mode 100644 configs/ls1021atwr_nor_defconfig create mode 100644 include/configs/ls1021atwr.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d7ed3e2..11143a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -473,6 +473,9 @@ config TARGET_LS2085A_SIMU config TARGET_LS1021AQDS bool "Support ls1021aqds_nor"
+config TARGET_LS1021ATWR + bool "Support ls1021atwr_nor" + config TARGET_BALLOON3 bool "Support balloon3"
@@ -598,6 +601,7 @@ source "board/eukrea/cpuat91/Kconfig" source "board/faraday/a320evb/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" +source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/freescale/mx25pdk/Kconfig" source "board/freescale/mx28evk/Kconfig" diff --git a/board/freescale/ls1021atwr/Kconfig b/board/freescale/ls1021atwr/Kconfig new file mode 100644 index 0000000..057808d --- /dev/null +++ b/board/freescale/ls1021atwr/Kconfig @@ -0,0 +1,23 @@ +if TARGET_LS1021ATWR + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "ls1021atwr" + +config SYS_VENDOR + string + default "freescale" + +config SYS_SOC + string + default "ls102xa" + +config SYS_CONFIG_NAME + string + default "ls1021atwr" + +endif diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS new file mode 100644 index 0000000..4e5bc15 --- /dev/null +++ b/board/freescale/ls1021atwr/MAINTAINERS @@ -0,0 +1,6 @@ +LS1021ATWR BOARD +M: Alison Wang alison.wang@freescale.com +S: Maintained +F: board/freescale/ls1021atwr/ +F: include/configs/ls1021atwr.h +F: configs/ls1021atwr_nor_defconfig diff --git a/board/freescale/ls1021atwr/Makefile b/board/freescale/ls1021atwr/Makefile new file mode 100644 index 0000000..b5df668 --- /dev/null +++ b/board/freescale/ls1021atwr/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1021atwr.o diff --git a/board/freescale/ls1021atwr/README b/board/freescale/ls1021atwr/README new file mode 100644 index 0000000..d2821cb --- /dev/null +++ b/board/freescale/ls1021atwr/README @@ -0,0 +1,109 @@ +Overview +-------- +The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC. + +LS1021A SoC Overview +------------------ +The QorIQ LS1 family, which includes the LS1021A communications processor, +is built on Layerscape architecture, the industry's first software-aware, +core-agnostic networking architecture to offer unprecedented efficiency +and scale. + +A member of the value-performance tier, the QorIQ LS1021A processor provides +extensive integration and power efficiency for fanless, small form factor +enterprise networking applications. Incorporating dual ARM Cortex-A7 cores +running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark +performance of over 6,000, as well as virtualization support, advanced +security features and the broadest array of high-speed interconnects and +optimized peripheral features ever offered in a sub-3 W processor. + +The QorIQ LS1021A processor features an integrated LCD controller, +CAN controller for implementing industrial protocols, DDR3L/4 running +up to 1600 MHz, integrated security engine and QUICC Engine, and ECC +protection on both L1 and L2 caches. The LS1021A processor is pin- and +software-compatible with the QorIQ LS1020A and LS1022A processors. + +The LS1021A SoC includes the following function and features: + + - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture + - Dual high-preformance ARM Cortex-A7 cores, each core includes: + - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection) + - 512 Kbyte shared coherent L2 Cache (with ECC protection) + - NEON Co-processor (per core) + - 40-bit physical addressing + - Vector floating-point support + - ARM Core-Link CCI-400 Cache Coherent Interconnect + - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration + supporting speeds up to 1600Mtps + - ECC and interleaving support + - VeTSEC Ethernet complex + - Up to 3x virtualized 10/100/1000 Ethernet controllers + - MII, RMII, RGMII, and SGMII support + - QoS, lossless flow control, and IEEE 1588 support + - 4-lane 6GHz SerDes + - High speed interconnect (4 SerDes lanes with are muxed for these protocol) + - Two PCI Express Gen2 controllers running at up to 5 GHz + - One Serial ATA 3.0 supporting 6 GT/s operation + - Two SGMII interfaces supporting 1000 Mbps + - Additional peripheral interfaces + - One high-speed USB 3.0 controller with integrated PHY and one high-speed + USB 2.00 controller with ULPI + - Integrated flash controller (IFC) with 16-bit interface + - Quad SPI NOR Flash + - One enhanced Secure digital host controller + - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface) + - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power + UARTs + - Three I2C controllers + - Eight FlexTimers four supporting PWM and four FlexCAN ports + - Four GPIO controllers supporting up to 109 general purpose I/O signals + - Integrated advanced audio block: + - Four synchronous audio interfaces (SAI) + - Sony/Philips Digital Interconnect Format (SPDIF) + - Asynchronous Sample Rate Converter (ASRC) + - Hardware based crypto offload engine + - IPSec forwarding at up to 1Gbps + - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported + - Public key hardware accelerator + - True Random Number Generator (NIST Certified) + - Advanced Encryption Standard Accelerators (AESA) + - Data Encryption Standard Accelerators + - QUICC Engine ULite block + - Two universal communication controllers (TDM and HDLC) supporting 64 + multichannels, each running at 64 Kbps + - Support for 256 channels of HDLC + - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported + +LS1021ATWR board Overview +------------------------- + - DDR Controller + - Supports rates of up to 1600 MHz data-rate + - Supports one DDR3LP SDRAM. + - IFC/Local Bus + - NOR: 128MB 16-bit NOR Flash + - Ethernet + - Three on-board RGMII 10/100/1G ethernet ports. + - CPLD + - Clocks + - System and DDR clock (SYSCLK, DDRCLK) + - SERDES clocks + - Power Supplies + - SDHC + - SDHC/SDXC connector + - Other IO + - One Serial port + - Three I2C ports + +Memory map +----------- +The addresses in brackets are physical addresses. + +Start Address End Address Description Size +0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB +0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB +0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB +0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB +0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB +0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB +0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB +0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c new file mode 100644 index 0000000..92ad8cd --- /dev/null +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -0,0 +1,482 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/immap_ls102xa.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <fsl_ifc.h> +#include <netdev.h> +#include <fsl_mdio.h> +#include <tsec.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define VERSION_MASK 0x00FF +#define BANK_MASK 0x0001 +#define CONFIG_RESET 0x1 +#define INIT_RESET 0x1 + +#define CPLD_SET_MUX_SERDES 0x20 +#define CPLD_SET_BOOT_BANK 0x40 + +#define BOOT_FROM_UPPER_BANK 0x0 +#define BOOT_FROM_LOWER_BANK 0x1 + +#define LANEB_SATA (0x01) +#define LANEB_SGMII1 (0x02) +#define LANEC_SGMII1 (0x04) +#define LANEC_PCIEX1 (0x08) +#define LANED_PCIEX2 (0x10) +#define LANED_SGMII2 (0x20) + +#define MASK_LANE_B 0x1 +#define MASK_LANE_C 0x2 +#define MASK_LANE_D 0x4 +#define MASK_SGMII 0x8 + +#define KEEP_STATUS 0x0 +#define NEED_RESET 0x1 + +struct cpld_data { + u8 cpld_ver; /* cpld revision */ + u8 cpld_ver_sub; /* cpld sub revision */ + u8 pcba_ver; /* pcb revision number */ + u8 system_rst; /* reset system by cpld */ + u8 soft_mux_on; /* CPLD override physical switches Enable */ + u8 cfg_rcw_src1; /* Reset config word 1 */ + u8 cfg_rcw_src2; /* Reset config word 2 */ + u8 vbank; /* Flash bank selection Control */ + u8 gpio; /* GPIO for TWR-ELEV */ + u8 i2c3_ifc_mux; + u8 mux_spi2; + u8 can3_usb2_mux; /* CAN3 and USB2 Selection */ + u8 qe_lcd_mux; /* QE and LCD Selection */ + u8 serdes_mux; /* Multiplexed pins for SerDes Lanes */ + u8 global_rst; /* reset with init CPLD reg to default */ + u8 rev1; /* Reserved */ + u8 rev2; /* Reserved */ +}; + +static void convert_serdes_mux(int type, int need_reset); + +void cpld_show(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("CPLD: V%x.%x\nPCBA: V%x.0\nVBank: %d\n", + in_8(&cpld_data->cpld_ver) & VERSION_MASK, + in_8(&cpld_data->cpld_ver_sub) & VERSION_MASK, + in_8(&cpld_data->pcba_ver) & VERSION_MASK, + in_8(&cpld_data->vbank) & BANK_MASK); + +#ifdef CONFIG_DEBUG + printf("soft_mux_on =%x\n", + in_8(&cpld_data->soft_mux_on)); + printf("cfg_rcw_src1 =%x\n", + in_8(&cpld_data->cfg_rcw_src1)); + printf("cfg_rcw_src2 =%x\n", + in_8(&cpld_data->cfg_rcw_src2)); + printf("vbank =%x\n", + in_8(&cpld_data->vbank)); + printf("gpio =%x\n", + in_8(&cpld_data->gpio)); + printf("i2c3_ifc_mux =%x\n", + in_8(&cpld_data->i2c3_ifc_mux)); + printf("mux_spi2 =%x\n", + in_8(&cpld_data->mux_spi2)); + printf("can3_usb2_mux =%x\n", + in_8(&cpld_data->can3_usb2_mux)); + printf("qe_lcd_mux =%x\n", + in_8(&cpld_data->qe_lcd_mux)); + printf("serdes_mux =%x\n", + in_8(&cpld_data->serdes_mux)); +#endif +} + +int checkboard(void) +{ + puts("Board: LS1021ATWR\n"); + cpld_show(); + + return 0; +} + +void ddrmc_init(void) +{ + struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG); + + out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS); + out_be32(&ddr->cs0_config, DDR_CS0_CONFIG); + + out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0); + out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1); + out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2); + out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3); + out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4); + out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5); + + out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); + + out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE); + out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2); + + out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL); + + out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL); + + out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2); + out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3); + + out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1); + out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); + + out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL); + out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL); + + out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2); + udelay(1); + out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | DDR_SDRAM_CFG_MEM_EN); +} + +int dram_init(void) +{ +#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) + ddrmc_init(); +#endif + + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + return 0; +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {CONFIG_SYS_FSL_ESDHC_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} +#endif + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (is_serdes_configured(SGMII_TSEC2)) { + puts("eTSEC2 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + num++; +#endif + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +int config_serdes_mux(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 protocol = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK; + + protocol >>= RCWSR4_SRDS1_PRTCL_SHIFT; + switch (protocol) { + case 0x10: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANED_PCIEX2 | + LANEC_PCIEX1, KEEP_STATUS); + break; + case 0x20: + convert_serdes_mux(LANEB_SGMII1, KEEP_STATUS); + convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + case 0x30: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANEC_SGMII1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + case 0x70: + convert_serdes_mux(LANEB_SATA, KEEP_STATUS); + convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS); + convert_serdes_mux(LANED_SGMII2, KEEP_STATUS); + break; + } + + return 0; +} + +int board_early_init_f(void) +{ + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + +#ifdef CONFIG_TSEC_ENET + out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); + out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); + udelay(10); + out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); +#endif + +#ifdef CONFIG_FSL_IFC + init_early_memctl_regs(); +#endif + + return 0; +} + +int board_init(void) +{ +#ifndef CONFIG_SYS_FSL_NO_SERDES + fsl_serdes_init(); + config_serdes_mux(); +#endif + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} + +u8 flash_read8(void *addr) +{ + return __raw_readb(addr + 1); +} + +void flash_write16(u16 val, void *addr) +{ + u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); + + __raw_writew(shftval, addr); +} + +u16 flash_read16(void *addr) +{ + u16 val = __raw_readw(addr); + + return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); +} + +static void convert_flash_bank(char bank) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("Now switch to boot from flash bank %d.\n", bank); + cpld_data->soft_mux_on = CPLD_SET_BOOT_BANK; + cpld_data->vbank = bank; + + printf("Reset board to enable configuration.\n"); + cpld_data->system_rst = CONFIG_RESET; +} + +static int flash_bank_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "0") == 0) + convert_flash_bank(BOOT_FROM_UPPER_BANK); + else if (strcmp(argv[1], "1") == 0) + convert_flash_bank(BOOT_FROM_LOWER_BANK); + else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + boot_bank, 2, 0, flash_bank_cmd, + "Flash bank Selection Control", + "bank[0-upper bank/1-lower bank] (e.g. boot_bank 0)" +); + +static int cpld_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + if (argc > 2) + return CMD_RET_USAGE; + if ((argc == 1) || (strcmp(argv[1], "conf") == 0)) + cpld_data->system_rst = CONFIG_RESET; + else if (strcmp(argv[1], "init") == 0) + cpld_data->global_rst = INIT_RESET; + else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + cpld_reset, 2, 0, cpld_reset_cmd, + "Reset via CPLD", + "conf\n" + " -reset with current CPLD configuration\n" + "init\n" + " -reset and initial CPLD configuration with default value" + +); + +static void convert_serdes_mux(int type, int need_reset) +{ + char current_serdes; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + current_serdes = cpld_data->serdes_mux; + + switch (type) { + case LANEB_SATA: + current_serdes &= ~MASK_LANE_B; + break; + case LANEB_SGMII1: + current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C); + break; + case LANEC_SGMII1: + current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C); + break; + case LANED_SGMII2: + current_serdes |= MASK_LANE_D; + break; + case LANEC_PCIEX1: + current_serdes |= MASK_LANE_C; + break; + case (LANED_PCIEX2 | LANEC_PCIEX1): + current_serdes |= MASK_LANE_C; + current_serdes &= ~MASK_LANE_D; + break; + default: + printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type); + return; + } + + cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES; + cpld_data->serdes_mux = current_serdes; + + if (need_reset == 1) { + printf("Reset board to enable configuration\n"); + cpld_data->system_rst = CONFIG_RESET; + } +} + +void print_serdes_mux(void) +{ + char current_serdes; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + current_serdes = cpld_data->serdes_mux; + + printf("Serdes Lane B: "); + if ((current_serdes & MASK_LANE_B) == 0) + printf("SATA,\n"); + else + printf("SGMII 1,\n"); + + printf("Serdes Lane C: "); + if ((current_serdes & MASK_LANE_C) == 0) + printf("SGMII 1,\n"); + else + printf("PCIe,\n"); + + printf("Serdes Lane D: "); + if ((current_serdes & MASK_LANE_D) == 0) + printf("PCIe,\n"); + else + printf("SGMII 2,\n"); + + printf("SGMII 1 is on lane "); + if ((current_serdes & MASK_SGMII) == 0) + printf("C.\n"); + else + printf("B.\n"); +} + +static int serdes_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "sata") == 0) { + printf("Set serdes lane B to SATA.\n"); + convert_serdes_mux(LANEB_SATA, NEED_RESET); + } else if (strcmp(argv[1], "sgmii1b") == 0) { + printf("Set serdes lane B to SGMII 1.\n"); + convert_serdes_mux(LANEB_SGMII1, NEED_RESET); + } else if (strcmp(argv[1], "sgmii1c") == 0) { + printf("Set serdes lane C to SGMII 1.\n"); + convert_serdes_mux(LANEC_SGMII1, NEED_RESET); + } else if (strcmp(argv[1], "sgmii2") == 0) { + printf("Set serdes lane D to SGMII 2.\n"); + convert_serdes_mux(LANED_SGMII2, NEED_RESET); + } else if (strcmp(argv[1], "pciex1") == 0) { + printf("Set serdes lane C to PCIe X1.\n"); + convert_serdes_mux(LANEC_PCIEX1, NEED_RESET); + } else if (strcmp(argv[1], "pciex2") == 0) { + printf("Set serdes lane C & lane D to PCIe X2.\n"); + convert_serdes_mux((LANED_PCIEX2 | LANEC_PCIEX1), NEED_RESET); + } else if (strcmp(argv[1], "show") == 0) { + print_serdes_mux(); + } else { + return CMD_RET_USAGE; + } + + return 0; +} + +U_BOOT_CMD( + lane_bank, 2, 0, serdes_mux_cmd, + "Multiplexed function setting for SerDes Lanes", + "sata\n" + " -change lane B to sata\n" + "lane_bank sgmii1b\n" + " -change lane B to SGMII1\n" + "lane_bank sgmii1c\n" + " -change lane C to SGMII1\n" + "lane_bank sgmii2\n" + " -change lane D to SGMII2\n" + "lane_bank pciex1\n" + " -change lane C to PCIeX1\n" + "lane_bank pciex2\n" + " -change lane C & lane D to PCIeX2\n" + "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n" +); diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig new file mode 100644 index 0000000..5f465d3 --- /dev/null +++ b/configs/ls1021atwr_nor_defconfig @@ -0,0 +1,2 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1021ATWR=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h new file mode 100644 index 0000000..cb6b400 --- /dev/null +++ b/include/configs/ls1021atwr.h @@ -0,0 +1,273 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <config_cmd_default.h> + +#define CONFIG_LS102XA + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +/* + * Generic Timer Definitions + */ +#define GENERIC_TIMER_CLK 12500000 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_SYS_HAS_SERDES + +/* + * IFC Definitions + */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) + +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_TRHZ_80) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TAVDS(0x0) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) | \ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c) | \ + FTIM2_NOR_TWPH(0x0e)) +#define CONFIG_SYS_NOR_FTIM3 0 + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } + +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* CPLD */ + +#define CONFIG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) + +/* CPLD Timing parameters for IFC GPCM */ +#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ + FTIM0_GPCM_TEADC(0xf) | \ + FTIM0_GPCM_TEAHC(0xf)) +#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ + FTIM2_GPCM_TCH(0xf) | \ + FTIM2_GPCM_TWP(0xff)) +#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +#define CONFIG_BAUDRATE 115200 + +/* + * I2C + */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC + +/* + * eTSEC + */ +#define CONFIG_TSEC_ENET + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_MII +#define CONFIG_MII_DEFAULT_TSEC 1 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#endif + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_CMDLINE_TAG +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CMD_IMLS + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "initrd_high=0xcfffffff\0" \ + "fdt_high=0xcfffffff\0" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_ENV_EXISTS +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (30 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_CMD_BOOTZ + +#endif