Re: [U-Boot] U-Boot 2012.10 PXA270 - saveenv / Kernel issue

Hello Rommel,

Am 11.11.2012 23:35, schrieb Rommel G Custodio:

[...]

As an addition to Andreas' fine comment.

Are you using the stock configuration file from the latest u-boot?

Yes. Im using the stock configuriont from U-Boot 2012.10

Also verify your boot/bootm command.

My boot comand points to the load adress 0xC0000 whre i've copied the kernel.

I will assume that you copy the kernel from flash to DRAM, if so please make sure you are reading from the correct flash offset and reading the correct kernel size.

Now i must asked you a dumpd question: Is that fixed in the Kernel / uImage ?

Kind regards Andreas