Add support for the Matrix Vision mvBlueLYNX-X, an OMAP3-based intelligent camera.
These patches were created on top of v2011.06, but they also apply cleanly to master and u-boot-arm/master. What should I use as base to submit such a patch?
Howard D. Gray (1): Add 37xx ESx revision numbers.
Michael Jones (5): fpga: support FPP Cyclone configuration mmc: rescan fails on empty slot mv_common.c: don't compile reset_environment if ENV_IS_NOWHERE ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write mvblx: Initial support for mvBlueLYNX-X
MAINTAINERS | 4 + MAKEALL | 1 + arch/arm/cpu/armv7/omap3/sys_info.c | 13 +- arch/arm/include/asm/arch-omap3/omap3.h | 10 + board/matrix_vision/common/mv_common.c | 2 + board/matrix_vision/mvblx/Makefile | 53 ++++ board/matrix_vision/mvblx/config.mk | 33 +++ board/matrix_vision/mvblx/fpga.c | 222 +++++++++++++++++ board/matrix_vision/mvblx/fpga.h | 32 +++ board/matrix_vision/mvblx/mvblx.c | 171 +++++++++++++ board/matrix_vision/mvblx/mvblx.h | 362 ++++++++++++++++++++++++++++ board/matrix_vision/mvblx/sys_eeprom.c | 396 +++++++++++++++++++++++++++++++ boards.cfg | 1 + common/cmd_mmc.c | 6 +- doc/README.omap3 | 5 + drivers/fpga/cyclon2.c | 10 + drivers/i2c/omap24xx_i2c.c | 134 +++++------ include/configs/omap3_mvblx.h | 312 ++++++++++++++++++++++++ 18 files changed, 1686 insertions(+), 81 deletions(-) create mode 100644 board/matrix_vision/mvblx/Makefile create mode 100644 board/matrix_vision/mvblx/config.mk create mode 100644 board/matrix_vision/mvblx/fpga.c create mode 100644 board/matrix_vision/mvblx/fpga.h create mode 100644 board/matrix_vision/mvblx/mvblx.c create mode 100644 board/matrix_vision/mvblx/mvblx.h create mode 100644 board/matrix_vision/mvblx/sys_eeprom.c create mode 100644 include/configs/omap3_mvblx.h