Use phys_addr_t for physical address declaration. It is also unsigned type instead of sign.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/net/zynq_gem.c | 5 +++-- include/netdev.h | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 3cadd23bb46a..430e22821c7d 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -489,7 +489,8 @@ static int zynq_gem_miiphy_write(const char *devname, uchar addr, return phywrite(dev, addr, reg, val); }
-int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) +int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr, + int phy_addr, u32 emio) { struct eth_device *dev; struct zynq_gem_priv *priv; @@ -521,7 +522,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) priv->phyaddr = phy_addr; priv->emio = emio;
- sprintf(dev->name, "Gem.%x", base_addr); + sprintf(dev->name, "Gem.%lx", base_addr);
dev->iobase = base_addr;
diff --git a/include/netdev.h b/include/netdev.h index 34651ab37790..daffc1222d60 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -93,7 +93,8 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); int zynq_gem_of_init(const void *blob); -int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); +int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr, + int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface * exported by a public hader file, we need a global definition at this point. -- 1.8.2.3