Hello,
I read the past posts (eg. from 2014) in this topic, but wasn't helpful. I would like to run from u-boot a test binary or test image, both good. I thought, I could solve this with standalone applications. I use gcc-linaro-6.2-2016.11.tar.xz > arm-linux-gnuabi-
I downloaded the u-boot repo, hello_world.c I got all files: like hello_world, hello_world.bin, hello_world.srec.. etc
Run tools/mkimage -A arm -O u-boot -T standalone -C none -a 0x200000 -e 0x200000 -n hello_world -d example/standalone/hello_world hello_world.img # I tried without u-boot too
I added to boot partition these files.. I did:
load mmc 0:1 0xc100000 hello_world.bin # I tried with fatload and hello_world,img too here.. go 0xc100000 Hello World!
But nothing happens.. I can't exit from the command line.. I will add files with Yocto.. so therefore I would like to try out how to run in this way..
Any suggestions what I should do?
Thanks in advance, Szabolcs