On Thu, Aug 7, 2008 at 2:18 PM, Wolfgang Denk wd@denx.de wrote:
In message 59b21cf20808070456vb8452at5717b580b630e7cc@mail.gmail.com you wrote:
+#undef CONFIG_CMD_IMLS
Why do you want to disable the "imls" command?
Because I get compilation errors from cmd_bootm.c if it's enabled. I haven't checked the details but perhaps it's because there is no NOR flash defined in this config (no NOR present on the PDK board).
Ah! This is an indication of a problem with your board. You rather fix this. "imls" is a standard command, and if you have to disablke it to compile U-Boot, then something is broken.
Well, I wonder if that's the case here. cmd_bootm.c needs the flash_info_t datatype (amongst other things) when CONFIG_CMD_IMLS is enabled. flash_info_t is found in include/flash.h but within a #ifndef CFG_NO_FLASH. CFG_NO_FLASH is, as far as I can see, defined for boards that don't have any NOR flash.
I haven't looked at all the config files for the boards that undef CONFIG_CMD_IMLS but at least a couple of AT91SAM926x and Davinci boards with only NAND flash present do this.
Regards, Magnus