WARNING: unmet direct dependencies detected for PL01X_SERIAL Depends on [n]: SERIAL [=y] && DM_SERIAL [=n] Selected by [y]: - TARGET_IMX28WINKHUB [=y] && <choice>
WARNING: unmet direct dependencies detected for PL01X_SERIAL Depends on [n]: SERIAL [=y] && DM_SERIAL [=n] Selected by [y]: - TARGET_IMX28WINKHUB [=y] && <choice>
I also tried building and booting your latest version, but just got "LLC".
I'll try putting a logic analyser on the UART pins to see if anything else shows up, but I didn't see anything else on the USB-UART at 115200.
Where are the LLC characters coming from? It's a little tricky to grep the source for a single character :-(
Rogan
On Tue, 26 Sept 2023 at 18:47, Fabio Estevam festevam@gmail.com wrote:
Hi Rogan,
On Tue, Sep 26, 2023 at 1:01 AM Rogan Dawes rogan@dawes.za.net wrote:
Hi Fabio,
That prints "LLC", but does not print "Pref".
What happens if you unselect DM_SERIAL like this:
--- a/configs/imx28-wink-hub_defconfig +++ b/configs/imx28-wink-hub_defconfig @@ -58,4 +58,3 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_RTC_MXS=y -CONFIG_DM_SERIAL=y