This patch adds a non-EEPROM-driven SDRAM initialization function driven by compile-time CFG_SDRAM_* parameters usable by 405EX(r)-based boards that have discrete SDRAM chips rather than DIMMs.
This patch continues laying the ground work for moving out-of-assembly and unifying the SDRAM initialization code for PowerPC 405EX[r]-based boards.
Integration and unification of the EEPROM-driven version with this parameter driven version may be tackled on another, later pass.
Signed-off-by: Grant Erickson gerickson@nuovations.com --- cpu/ppc4xx/44x_spd_ddr2.c | 126 ++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 120 insertions(+), 6 deletions(-)
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index ec76b71..c88d098 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -3,11 +3,14 @@ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a * DDR2 controller (non Denali Core). Those currently are: * - * 405: 405EX + * 405: 405EX(r) * 440/460: 440SP/440SPe/460EX/460GT * - * (C) Copyright 2007-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson gerickson@nuovations.com + * + * Copyright (c) 2007-2008 DENX Software Engineering, GmbH + * Stefan Roese sr@denx.de * * COPYRIGHT AMCC CORPORATION 2004 * @@ -45,6 +48,10 @@ #include <asm/mmu.h> #include <asm/cache.h>
+#if defined(CONFIG_DDR_ECC) +#include "ecc.h" +#endif + #if defined(CONFIG_SPD_EEPROM) && \ (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT)) @@ -3064,9 +3071,116 @@ static void ppc440sp_sdram_register_dump(void) dcr_data = mfdcr(SDRAM_R3BAS); printf(" MQ3_B0BAS = 0x%08X\n", dcr_data); } -#else +#else /* !defined(DEBUG) */ static void ppc440sp_sdram_register_dump(void) { } -#endif -#endif /* CONFIG_SPD_EEPROM */ +#endif /* defined(DEBUG) */ +#elif defined(CONFIG_405EX) +/*----------------------------------------------------------------------------- + * Function: initdram + * Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory + * banks. The configuration is performed using static, compile- + * time parameters. + *---------------------------------------------------------------------------*/ +long initdram(int board_type) +{ + unsigned long val; + + /* Set Memory Bank Configuration Registers */ + + mtsdram(SDRAM_MB0CF, CFG_SDRAM0_MB0CF); + mtsdram(SDRAM_MB1CF, CFG_SDRAM0_MB1CF); + mtsdram(SDRAM_MB2CF, CFG_SDRAM0_MB2CF); + mtsdram(SDRAM_MB3CF, CFG_SDRAM0_MB3CF); + + /* Set Memory Clock Timing Register */ + + mtsdram(SDRAM_CLKTR, CFG_SDRAM0_CLKTR); + + /* Set Refresh Time Register */ + + mtsdram(SDRAM_RTR, CFG_SDRAM0_RTR); + + /* Set SDRAM Timing Registers */ + + mtsdram(SDRAM_SDTR1, CFG_SDRAM0_SDTR1); + mtsdram(SDRAM_SDTR2, CFG_SDRAM0_SDTR2); + mtsdram(SDRAM_SDTR3, CFG_SDRAM0_SDTR3); + + /* Set Mode and Extended Mode Registers */ + + mtsdram(SDRAM_MMODE, CFG_SDRAM0_MMODE); + mtsdram(SDRAM_MEMODE, CFG_SDRAM0_MEMODE); + + /* Set Memory Controller Options 1 Register */ + + mtsdram(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1); + + /* Set Manual Initialization Control Registers */ + + mtsdram(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0); + mtsdram(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1); + mtsdram(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2); + mtsdram(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3); + mtsdram(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4); + mtsdram(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5); + mtsdram(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6); + mtsdram(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7); + mtsdram(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8); + mtsdram(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9); + mtsdram(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10); + mtsdram(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11); + mtsdram(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12); + mtsdram(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13); + mtsdram(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14); + mtsdram(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15); + + /* Set On-Die Termination Registers */ + + mtsdram(SDRAM_CODT, CFG_SDRAM0_CODT); + mtsdram(SDRAM_MODT0, CFG_SDRAM0_MODT0); + mtsdram(SDRAM_MODT1, CFG_SDRAM0_MODT1); + + /* Set Write Timing Register */ + + mtsdram(SDRAM_WRDTR, CFG_SDRAM0_WRDTR); + + /* + * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and + * SDRAM0_MCOPT2[IPTR] = 1 + */ + + mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT | + SDRAM_MCOPT2_IPTR_EXECUTE)); + + /* + * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the + * completion of initialization. + */ + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP); + + /* Set Delay Control Registers */ + + mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR); + mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC); + mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC); + mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC); + + /* + * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1: + */ + + mfsdram(SDRAM_MCOPT2, val); + mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE); + +#if defined(CONFIG_DDR_ECC) + ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20); +#endif /* defined(CONFIG_DDR_ECC) */ + + return (CFG_MBYTES_SDRAM << 20); +} +#endif /* defined(CONFIG_SPD_EEPROM) && defined(CONFIG_440SP) || ... */