Loongson 1C is a cost-effective SOC chip for industrial control and the Internet of Things. The Loongson 1C includes a floating-point processing unit, supports multiple types of memory, and supports high-capacity MLC NAND Flash. Loongson 1C provides developers with a wealth of peripheral interfaces and on-chip modules, including Camera controller, USB OTG and USB HOST interfaces, AC97/I2S controller, LCD controller, SPI interface, UART interface, etc., providing sufficient computing power and multi-application connectivity.
Some highlights of this SoC are: - Single core LS232, MIPS32 instruction set compatible, main frequency 300MHZ - 16KB data cache and 16KB instruction cache - 64 bit float unit, hardware division - 8/16 bit SDRAM controller, 45 ~ 133MHz - 8/16 bit SRAM, NAND - I2S/AC97, LCD, MAC, USB, OTG, SPI, I2C, PWM, CAN, SDIO, ADC - 12 UARTs
See Techinical Reference Manual for details: https://www.loongson.cn/ https://github.com/hodcarrier/ls1c300_bsp
Signed-off-by: Du Huanpeng dhu@hodcarrier.org --- MAINTAINERS | 15 +++++ Makefile | 1 + arch/mips/Kconfig | 11 ++++ arch/mips/Makefile | 1 + arch/mips/dts/Makefile | 1 + arch/mips/mach-lsmips/Kconfig | 76 ++++++++++++++++++++++++++ arch/mips/mach-lsmips/Makefile | 6 ++ arch/mips/mach-lsmips/ls1c300/Makefile | 7 +++ configs/ls1c300_defconfig | 53 ++++++++++++++++++ 9 files changed, 171 insertions(+) create mode 100644 arch/mips/mach-lsmips/Kconfig create mode 100644 arch/mips/mach-lsmips/Makefile create mode 100644 arch/mips/mach-lsmips/ls1c300/Makefile create mode 100644 configs/ls1c300_defconfig
diff --git a/MAINTAINERS b/MAINTAINERS index 87991cccdd..91d6d714d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1116,6 +1116,21 @@ F: drivers/net/cortina_ni.c F: drivers/net/cortina_ni.h F: drivers/net/phy/ca_phy.c
+MIPS LOONGSON LS1C300 +M: Du Huanpeng dhu@hodcarrier.org +S: Maintained +F: arch/mips/dts/loongson32-ls1c300b.dtsi +F: arch/mips/dts/ls1c300-eval.dts +F: arch/mips/mach-lsmips/ +F: board/loongson/ls1c300-eval/ +F: configs/ls1c300_defconfig +F: drivers/clk/lsmips/ +F: drivers/reset/reset-lsmips.c +F: drivers/watchdog/lsmips_wdt.c +F: include/configs/ls1c300.h +F: include/dt-bindings/clock/ls1c300-clk.h +F: include/dt-bindings/reset/ls1c300-reset.h + MIPS MEDIATEK M: Weijie Gao weijie.gao@mediatek.com R: GSS_MTK_Uboot_upstream GSS_MTK_Uboot_upstream@mediatek.com diff --git a/Makefile b/Makefile index 87f9fc786e..f7114e3597 100644 --- a/Makefile +++ b/Makefile @@ -1766,6 +1766,7 @@ ifeq ($(CONFIG_KALLSYMS),y) $(call cmd,smap) $(call cmd,u-boot__) common/system_map.o endif + -cp u-boot $(tftpboot)
ifeq ($(CONFIG_RISCV),y) @tools/prelink-riscv $@ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 569f5f48bc..fa2d9af9ba 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -88,6 +88,16 @@ config ARCH_MTMIPS select SUPPORTS_LITTLE_ENDIAN select SUPPORT_SPL
+config ARCH_LSMIPS + bool "Support Loongson MIPS platforms" + select DM + select DM_SERIAL + select OF_CONTROL + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN + select SUPPORT_SPL + config ARCH_JZ47XX bool "Support Ingenic JZ47xx" select SUPPORT_SPL @@ -173,6 +183,7 @@ source "arch/mips/mach-bmips/Kconfig" source "arch/mips/mach-jz47xx/Kconfig" source "arch/mips/mach-pic32/Kconfig" source "arch/mips/mach-mtmips/Kconfig" +source "arch/mips/mach-lsmips/Kconfig" source "arch/mips/mach-octeon/Kconfig"
if MIPS diff --git a/arch/mips/Makefile b/arch/mips/Makefile index a007914590..342cea6655 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -19,6 +19,7 @@ machine-$(CONFIG_ARCH_BMIPS) += bmips machine-$(CONFIG_ARCH_JZ47XX) += jz47xx machine-$(CONFIG_MACH_PIC32) += pic32 machine-$(CONFIG_ARCH_MTMIPS) += mtmips +machine-$(CONFIG_ARCH_LSMIPS) += lsmips machine-$(CONFIG_ARCH_MSCC) += mscc machine-${CONFIG_ARCH_OCTEON} += octeon
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index 1b179116c9..5cb7490a79 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_BOARD_MT7621_NAND_RFB) += mediatek,mt7621-nand-rfb.dtb dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb +dtb-$(CONFIG_BOARD_LS1C300) += ls1c300-eval.dtb dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb dtb-$(CONFIG_TARGET_OCTEON_NIC23) += mrvl,octeon-nic23.dtb dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb diff --git a/arch/mips/mach-lsmips/Kconfig b/arch/mips/mach-lsmips/Kconfig new file mode 100644 index 0000000000..4f9c4e36ef --- /dev/null +++ b/arch/mips/mach-lsmips/Kconfig @@ -0,0 +1,76 @@ +menu "Loongson MIPS platforms" + depends on ARCH_LSMIPS + +config SYS_MALLOC_F_LEN + default 0x1000 + +config SYS_SOC + default "ls1c300" if SOC_LS1C300 + +config SYS_DCACHE_SIZE + default 16384 + +config SYS_DCACHE_LINE_SIZE + default 32 + +config SYS_ICACHE_SIZE + default 16384 + +config SYS_ICACHE_LINE_SIZE + default 32 + +config TEXT_BASE + default 0xbfc00000 if !SPL + default 0x80200000 if SPL + +config SPL_TEXT_BASE + default 0xbfc00000 + +config SPL_PAYLOAD + default "u-boot-lzma.img" if SPL_LZMA + +config BUILD_TARGET + default "u-boot-with-spl.bin" if SPL + default "u-boot.bin" if !SPL + +choice + prompt "Loongson MIPS SoC select" + +config SOC_LS1C300 + bool "LS1C300" + select CLK_CCF + select SPL_SEPARATE_BSS if SPL + select SPL_INIT_STACK_WITHOUT_MALLOC_F if SPL + select SPL_LOADER_SUPPORT if SPL + select SPL_OF_CONTROL if SPL_DM + select SPL_SIMPLE_BUS if SPL_DM + select SPL_DM_SERIAL if SPL_DM + select SPL_CLK if SPL_DM && SPL_SERIAL + select SPL_SYSRESET if SPL_DM + select SPL_OF_LIBFDT if SPL_OF_CONTROL + help + This supports Loongson LS1C300 + +endchoice + +choice + prompt "Board select" + +config BOARD_LS1C300 + bool "Loongson LS1C300 Eval" + depends on SOC_LS1C300 + help + ls1c300-eval board has a LS1C300 SoC with 64MiB of SDRAM + and 512KiB of flash (SPI NOR) and additional NAND storage. + +endchoice + +config CONS_PIN + int "pin group used in uart" + default 0 + help + Select pin group connected to UART for your board. + +source "board/loongson/ls1c300-eval/Kconfig" + +endmenu diff --git a/arch/mips/mach-lsmips/Makefile b/arch/mips/mach-lsmips/Makefile new file mode 100644 index 0000000000..654143a5f7 --- /dev/null +++ b/arch/mips/mach-lsmips/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += cpu.o +obj-$(CONFIG_SPL_BUILD) += spl.o + +obj-$(CONFIG_SOC_LS1C300) += ls1c300/ diff --git a/arch/mips/mach-lsmips/ls1c300/Makefile b/arch/mips/mach-lsmips/ls1c300/Makefile new file mode 100644 index 0000000000..17b9d6fb9c --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += lowlevel_init.o +obj-y += sdram.o +obj-y += init.o +obj-y += gpio.o +obj-$(CONFIG_SPL_BUILD) += serial.o diff --git a/configs/ls1c300_defconfig b/configs/ls1c300_defconfig new file mode 100644 index 0000000000..5634fb084a --- /dev/null +++ b/configs/ls1c300_defconfig @@ -0,0 +1,53 @@ +CONFIG_MIPS=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_MALLOC_F_LEN=0x40000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x1000 +CONFIG_DEFAULT_DEVICE_TREE="ls1c300-eval" +CONFIG_DM_RESET=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_SIZE_LIMIT=0x100000 +CONFIG_SPL=y +CONFIG_SYS_LOAD_ADDR=0x80010000 +CONFIG_ARCH_LSMIPS=y +CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_ROM_EXCEPTION_VECTORS=y +CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y +CONFIG_MIPS_BOOT_FDT=y +CONFIG_FIT=y +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_LOGLEVEL=9 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_PAD_TO=0 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 +CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_NOR_SUPPORT=y +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_CLK=y +# CONFIG_CMD_LOADS is not set +CONFIG_OF_EMBED=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set +CONFIG_CLK=y +CONFIG_SPL_CLK_CCF=y +# CONFIG_INPUT is not set +# CONFIG_POWER is not set +CONFIG_CONS_INDEX=2 +CONFIG_SPL_SYS_NS16550_SERIAL=y +CONFIG_SYS_NS16550_REG_SIZE=-1 +CONFIG_SPI=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_SYSRESET_WATCHDOG_AUTO=y +CONFIG_WATCHDOG_TIMEOUT_MSECS=3000 +CONFIG_WDT_LSMIPS=y +CONFIG_REGEX=y +# CONFIG_GZIP is not set