On Wed, May 20, 2015 at 11:43 AM, Markus Niebel list-09_u-boot@tqsc.de wrote:
Am 18.05.2015 um 15:56 schrieb Tim Harvey:
Use Temperature grade info in OTP/eFUSE for thermal management and display of thermal data.
Cc: Stefan Roese sr@denx.de Cc: Eric Nelson eric.nelson@boundarydevices.com Cc: Heiko Schocher hs@denx.de Cc: Nikita Kiryanov nikita@compulab.co.il Cc: Jon Nettleton jon.nettleton@gmail.com Cc: Jason Liu r64343@freescale.com Cc: Ye Li b37916@freescale.com Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Christian Gmeiner christian.gmeiner@gmail.com Cc: Markus Niebel Markus.Niebel@tq-group.com Cc: Peng Fan b51431@freescale.com Signed-off-by: Tim Harvey tharvey@gateworks.com
v3:
- include display of temperature grade for IMX6SX
v2:
- split into two series: 1 for CPU frequency, other for Temperature grade
Tim Harvey (4): mx6: add OTP bank1 registers imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP imx: mx6: add display of CPU temperature grade in print_cpuinfo() thermal: imx_thermal: use CPU temperature grade for trip points
arch/arm/cpu/armv7/mx6/soc.c | 38 +++++++++++++++++++++++++++++++ arch/arm/imx-common/cpu.c | 25 ++++++++++++++++---- arch/arm/include/asm/arch-mx6/imx-regs.h | 19 ++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + drivers/thermal/imx_thermal.c | 29 +++++++++++++++-------- include/imx_thermal.h | 6 +++++ 6 files changed, 104 insertions(+), 14 deletions(-)
Tested on TQMa6Q and TQMa6D
following patches were also applied: https://patchwork.ozlabs.org/patch/473405/ https://patchwork.ozlabs.org/patch/473406/
Tested-by: Markus Niebel Markus.Niebel@tq-group.com
I think those are applied in Stephano's tree today.