The PAL_BDC_CR should be PLA_BDC_CR.
Signed-off-by: Hayes Wang hayeswang@realtek.com --- drivers/usb/eth/r8152.c | 8 ++++---- drivers/usb/eth/r8152.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/eth/r8152.c b/drivers/usb/eth/r8152.c index 7c48663370..f201a1789b 100644 --- a/drivers/usb/eth/r8152.c +++ b/drivers/usb/eth/r8152.c @@ -711,9 +711,9 @@ static void r8152b_enter_oob(struct r8152 *tp)
rtl_rx_vlan_en(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR); ocp_data |= ALDPS_PROXY_MODE; - ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; @@ -844,9 +844,9 @@ static void r8153_enter_oob(struct r8152 *tp)
rtl_rx_vlan_en(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR); ocp_data |= ALDPS_PROXY_MODE; - ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h index 09f1c6178b..c7f62b8b3e 100644 --- a/drivers/usb/eth/r8152.h +++ b/drivers/usb/eth/r8152.h @@ -22,7 +22,7 @@ #define PLA_TEREDO_CFG 0xc0bc #define PLA_MAR 0xcd00 #define PLA_BACKUP 0xd000 -#define PAL_BDC_CR 0xd1a0 +#define PLA_BDC_CR 0xd1a0 #define PLA_TEREDO_TIMER 0xd2cc #define PLA_REALWOW_TIMER 0xd2e8 #define PLA_LEDSEL 0xdd90 @@ -225,7 +225,7 @@ #define TEREDO_RS_EVENT_MASK 0x00fe #define OOB_TEREDO_EN 0x0001
-/* PAL_BDC_CR */ +/* PLA_BDC_CR */ #define ALDPS_PROXY_MODE 0x0001
/* PLA_CONFIG34 */