This patch defines the post_hotkeys_pressed() function that is used for: - triggering POST memory regions test - starting the test application through the checktestboot command in a script by setting the active bank to testbank
The post_hotkeys_pressed return the state of the SELFTEST pin.
The patch moves from the complete POST-memory test that is too long in its SLOW version for our production HW test procedure to the much shorter POST-memory-regions test.
Finally, the unused #defines for the not so relevant mtest command are removed.
Signed-off-by: Stefan Bigler stefan.bigler@keymile.com Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com ---
board/keymile/kmp204x/kmp204x.c | 13 +++++++++++++ include/configs/km/kmp204x-common.h | 6 +----- 2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index fba1bdd..1ce8429 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -250,3 +250,16 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_mac_addresses(blob); #endif } + +#if defined(CONFIG_POST) + +/* DIC26_SELFTEST GPIO used to start factory test sw */ +#define SELFTEST_PORT GPIO_A +#define SELFTEST_PIN 31 + +int post_hotkeys_pressed(void) +{ + qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN); + return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN); +} +#endif diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 582978a..913084f 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -85,11 +85,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
-#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */
/* * Config the L3 Cache as L3 SRAM