Re: [U-Boot] [PATCH] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE

Hi Minkyu,

Support for a new command (defined at envs) - spl_export generates the ATAGS image necessary for fast boot. Afterwards, it is stored at ext4 partition.

Generated image format: CRC [4B] SIZE [4B] PAYLOAD(ATAGS/DT) [SIZE]

Remarks:

• CRC is calculated only for PAYLOAD
• SIZE is the size of PAYLOAD

It is important to adjust ${splsize} when large image is generated. It is defined as hex, since ext4 related commands expect it.

The ${spladdr} environment variable corresponds to CONFIG_SYS_SPL_ARGS_ADDR

Additionally definitions for DFU have been refactored and support for EFI has been added as well.

Could this patch be added to u-boot-samsung tree? It brings many updates for trats configuration and it would be nice to bring it to 2013.01 u-boot release.

Signed-off-by: Lukasz Majewski l.majewski@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com

---

board/samsung/trats/trats.c | 2 +- include/configs/trats.h | 45 +++++++++++++++++++++++++++++++++--------- 2 files changed, 36 insertions(+), 11 deletions(-)

diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index e540190..4738043 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -66,7 +66,7 @@ struct s3c_plat_otg_data s5pc210_otg_data;

int board_init(void) {

• gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

• gd->bd->bi_boot_params = CONFIG_SYS_SPL_ARGS_ADDR;

  check_hw_revision(); printf("HW Revision:\t0x%x\n", board_rev);

diff --git a/include/configs/trats.h b/include/configs/trats.h index 355029e..52fe77d 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -98,6 +98,7 @@ #undef CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC #define CONFIG_CMD_DFU +#define CONFIG_CMD_SETEXPR

/* FAT */ #define CONFIG_CMD_FAT @@ -123,9 +124,8 @@ #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"

#define CONFIG_DFU_ALT \

• "dfu_alt_info=" \ "u-boot mmc 80 400;" \
• "uImage fat 0 2\0" \

• "uImage ext4 0 2\0" \

#define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -144,20 +144,20 @@ "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ "lpj=lpj=3981312\0" \ "nfsboot=" \

• "set bootargs root=/dev/nfs rw " \
  

• "setenv bootargs root=/dev/nfs rw " \
  

  "nfsroot=${nfsroot},nolock,tcp " \ "ip=${ipaddr}:${serverip}:${gatewayip}:" \ "${netmask}:generic:usb0:off "

CONFIG_ENV_COMMON_BOOT \ "; run bootk\0" \ "ramfsboot=" \

• "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
  

• "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 "
  

\ "${console} ${meminfo} " \ "initrd=0x43000000,8M ramdisk=8192\0" \ "mmcboot=" \

• "set bootargs
  

root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \

• "setenv bootargs
  

root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ "run loaduimage; bootm 0x40007FC0\0" \

• "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \

• "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0"

\ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ "verify=n\0" \ @@ -166,12 +166,30 @@ "meminfo=crashkernel=32M@0x50000000\0" \ "nfsroot=/nfsroot/arm\0" \ "bootblock=" CONFIG_BOOTBLOCK "\0" \

• "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0

uImage\0" \

• "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0

uImage\0" \ "mmcdev=0\0" \ "mmcbootpart=2\0" \

• "mmcrootpart=3\0" \

• "mmcrootpart=5\0" \ "opts=always_resume=1\0" \

• CONFIG_DFU_ALT

• "dfu_alt_info=" CONFIG_DFU_ALT \
• "spladdr=0x40000100\0" \
• "splsize=0x200\0" \
• "splfile=falcon.bin\0" \
• "spl_export=" \

•    "setexpr spl_imgsize ${splsize} + 8 ;" \
  

•    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
  

•    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
  

•    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run
  

loaduimage;" \

•    "setenv bootargs
  

root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \

•    "${lpj} rootwait ${console} ${meminfo} ${opts}
  

${lcdinfo};" \

•    "spl export atags 0x40007FC0;" \
  

•    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
  

•    "mw.l ${spl_addr_tmp} ${splsize};" \
  

•    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
  

•    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
  

•    "setenv spl_imgsize;" \
  

•    "setenv spl_imgaddr;" \
  

•    "setenv spl_addr_tmp;\0"
  
  

/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -207,11 +225,18 @@ #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ #define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION

+/* EXT4 */ +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +/* Falcon mode definitions */ +#define CONFIG_CMD_SPL +#define CONFIG_SYS_SPL_ARGS_ADDR PHYS_SDRAM_1 + 0x100

#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_CACHELINE_SIZE 32

#define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD