Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd->reloc_off is calculated.
Signed-off-by: Angelo Dureghello sysamfw@gmail.com Cc: Jason Jin jason.jin@freescale.com --- diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..373570c 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- serial_initialize(); - debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ serial_initialize(); + monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)