Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it.
Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com --- v2: - drop redundant clock_set_pll10() call - fallback to timings from DT if reading EDID from bridge failed - read panel_bpp from DT
arch/arm/mach-sunxi/Kconfig | 2 +- drivers/video/sunxi/Makefile | 2 +- drivers/video/sunxi/sunxi_de2.c | 17 +++++ drivers/video/sunxi/sunxi_lcd.c | 149 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 168 insertions(+), 2 deletions(-) create mode 100644 drivers/video/sunxi/sunxi_lcd.c
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 2309f59999..06d697e3a7 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -680,7 +680,7 @@ config VIDEO_LCD_MODE
config VIDEO_LCD_DCLK_PHASE int "LCD panel display clock phase" - depends on VIDEO + depends on VIDEO || DM_VIDEO default 1 ---help--- Select LCD panel display clock phase shift, range 0-3. diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile index 0d64c2021f..8c91766c24 100644 --- a/drivers/video/sunxi/Makefile +++ b/drivers/video/sunxi/Makefile @@ -6,4 +6,4 @@ #
obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o lcdc.o tve_common.o ../videomodes.o -obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o +obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o sunxi_lcd.o diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c index ee67764ac5..a838bbacd1 100644 --- a/drivers/video/sunxi/sunxi_de2.c +++ b/drivers/video/sunxi/sunxi_de2.c @@ -232,6 +232,23 @@ static int sunxi_de2_probe(struct udevice *dev) if (!(gd->flags & GD_FLG_RELOC)) return 0;
+ ret = uclass_find_device_by_name(UCLASS_DISPLAY, + "sunxi_lcd", &disp); + if (!ret) { + int mux; + + mux = 0; + + ret = sunxi_de2_init(dev, plat->base, VIDEO_BPP32, disp, mux, + false); + if (!ret) { + video_set_flush_dcache(dev, 1); + return 0; + } + } + + debug("%s: lcd display not found (ret=%d)\n", __func__, ret); + ret = uclass_find_device_by_name(UCLASS_DISPLAY, "sunxi_dw_hdmi", &disp); if (!ret) { diff --git a/drivers/video/sunxi/sunxi_lcd.c b/drivers/video/sunxi/sunxi_lcd.c new file mode 100644 index 0000000000..b8e4b0e344 --- /dev/null +++ b/drivers/video/sunxi/sunxi_lcd.c @@ -0,0 +1,149 @@ +/* + * Allwinner LCD driver + * + * (C) Copyright 2017 Vasily Khoruzhick anarsoul@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <display.h> +#include <video_bridge.h> +#include <backlight.h> +#include <dm.h> +#include <edid.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/lcdc.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> + +struct sunxi_lcd_priv { + struct display_timing timing; + int panel_bpp; +}; + +static void sunxi_lcdc_config_pinmux(void) +{ +#ifdef CONFIG_MACH_SUN50I + int pin; + for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(21); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0); + sunxi_gpio_set_drv(pin, 3); + } +#endif +} + +static int sunxi_lcd_enable(struct udevice *dev, int bpp, + const struct display_timing *edid) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + struct sunxi_lcd_priv *priv = dev_get_priv(dev); + struct udevice *backlight; + int clk_div, clk_double, ret; + + /* Reset off */ + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0); + /* Clock on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0); + + lcdc_init(lcdc); + sunxi_lcdc_config_pinmux(); + lcdc_pll_set(ccm, 0, edid->pixelclock.typ / 1000, + &clk_div, &clk_double); + lcdc_tcon0_mode_set(lcdc, edid, clk_div, false, + priv->panel_bpp, CONFIG_VIDEO_LCD_DCLK_PHASE); + lcdc_enable(lcdc, priv->panel_bpp); + + ret = uclass_get_device(UCLASS_PANEL_BACKLIGHT, 0, &backlight); + if (!ret) + backlight_enable(backlight); + + return 0; +} + +static int sunxi_lcd_read_timing(struct udevice *dev, + struct display_timing *timing) +{ + struct sunxi_lcd_priv *priv = dev_get_priv(dev); + memcpy(timing, &priv->timing, sizeof(struct display_timing)); + + return 0; +} + +static int sunxi_lcd_probe(struct udevice *dev) +{ + struct udevice *cdev; + struct sunxi_lcd_priv *priv = dev_get_priv(dev); + int ret; + int node, timing_node, val; + +#ifdef CONFIG_VIDEO_BRIDGE + /* Try to get timings from bridge first */ + ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &cdev); + if (!ret) { + u8 edid[EDID_SIZE]; + int channel_bpp; + + ret = video_bridge_attach(cdev); + if (ret) { + debug("video bridge attach failed: %d\n", ret); + return ret; + } + ret = video_bridge_read_edid(cdev, edid, EDID_SIZE); + if (ret > 0) { + ret = edid_get_timing(edid, ret, &priv->timing, &channel_bpp); + priv->panel_bpp = channel_bpp * 3; + if (!ret) + return ret; + } + } +#endif + + /* Fallback to timings from DT if there's no bridge or + * if reading EDID failed + */ + ret = uclass_get_device(UCLASS_PANEL, 0, &cdev); + if (ret) { + debug("video panel not found: %d\n", ret); + return ret; + } + + if (fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(cdev), + 0, &priv->timing)) { + debug("%s: Failed to decode display timing\n", __func__); + return -EINVAL; + } + timing_node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(cdev), + "display-timings"); + node = fdt_first_subnode(gd->fdt_blob, timing_node); + val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1); + if (val != -1) + priv->panel_bpp = val; + else + priv->panel_bpp = 18; + + return 0; +} + +static const struct dm_display_ops sunxi_lcd_ops = { + .read_timing = sunxi_lcd_read_timing, + .enable = sunxi_lcd_enable, +}; + +U_BOOT_DRIVER(sunxi_lcd) = { + .name = "sunxi_lcd", + .id = UCLASS_DISPLAY, + .ops = &sunxi_lcd_ops, + .probe = sunxi_lcd_probe, + .priv_auto_alloc_size = sizeof(struct sunxi_lcd_priv), +}; + +#ifdef CONFIG_MACH_SUN50I +U_BOOT_DEVICE(sunxi_lcd) = { + .name = "sunxi_lcd" +}; +#endif