Restore the platdata(property of dt) into host struct. Then data's information is maintained and reused anywhere.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com Tested-by: Lukasz Majewski l.majewski@samsung.com Acked-by: Lukasz Majewski l.majewski@samsung.com --- drivers/mmc/exynos_dw_mmc.c | 208 +++++++++++++++++++++++++++---------------- include/dwmmc.h | 2 + 2 files changed, 132 insertions(+), 78 deletions(-)
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index e9d00e7..131ff72 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -14,6 +14,7 @@ #include <asm/arch/clk.h> #include <asm/arch/pinmux.h> #include <asm/gpio.h> +#include <asm-generic/errno.h>
#define DWMMC_MAX_CH_NUM 4 #define DWMMC_MAX_FREQ 52000000 @@ -45,6 +46,13 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host) & DWMCI_DIVRATIO_MASK) + 1; sclk = get_mmc_clk(host->dev_index);
+ /* + * Assume to know divider value. + * When clock unit is broken, need to set "host->div" + */ + if (host->div) + sclk /= (host->div + 1); + return sclk / clk_div; }
@@ -61,26 +69,17 @@ static void exynos_dwmci_board_init(struct dwmci_host *host) } }
-/* - * This function adds the mmc channel to be registered with mmc core. - * index - mmc channel number. - * regbase - register base address of mmc channel specified in 'index'. - * bus_width - operating bus width of mmc channel specified in 'index'. - * clksel - value to be written into CLKSEL register in case of FDT. - * NULL in case od non-FDT. - */ -int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) +static int exynos_dwmci_core_init(struct dwmci_host *host, int index) { - struct dwmci_host *host = NULL; unsigned int div; unsigned long freq, sclk; - host = malloc(sizeof(struct dwmci_host)); - if (!host) { - printf("dwmci_host malloc fail!\n"); - return 1; - } + + if (host->bus_hz) + freq = host->bus_hz; + else + freq = DWMMC_MAX_FREQ; + /* request mmc clock vlaue of 52MHz. */ - freq = 52000000; sclk = get_mmc_clk(index);
/* @@ -94,19 +93,15 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) set_mmc_clk(index, div);
host->name = "EXYNOS DWMMC"; - host->ioaddr = (void *)regbase; - host->buswidth = bus_width; #ifdef CONFIG_EXYNOS5420 host->quirks = DWMCI_QUIRK_DISABLE_SMU; #endif host->board_init = exynos_dwmci_board_init;
- if (clksel) { - host->clksel_val = clksel; - } else { - if (0 == index) + if (!host->clksel_val) { + if (index == 0) host->clksel_val = DWMMC_MMC0_CLKSEL_VAL; - if (2 == index) + if (index == 2) host->clksel_val = DWMMC_MMC2_CLKSEL_VAL; }
@@ -121,77 +116,134 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) return 0; }
+/* + * This function adds the mmc channel to be registered with mmc core. + * index - mmc channel number. + * regbase - register base address of mmc channel specified in 'index'. + * bus_width - operating bus width of mmc channel specified in 'index'. + * clksel - value to be written into CLKSEL register in case of FDT. + * NULL in case od non-FDT. + */ +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) +{ + struct dwmci_host *host = NULL; + + host = malloc(sizeof(struct dwmci_host)); + if (!host) { + error("dwmci_host malloc fail!\n"); + return -ENOMEM; + } + + host->ioaddr = (void *)regbase; + host->buswidth = bus_width; + + if (clksel) + host->clksel_val = clksel; + + return exynos_dwmci_core_init(host, index); +} + #ifdef CONFIG_OF_CONTROL -int exynos_dwmmc_init(const void *blob) +struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM]; + +static int do_dwmci_init(struct dwmci_host *host) { - int index, bus_width; - int node_list[DWMMC_MAX_CH_NUM]; - int err = 0, dev_id, flag, count, i, compat_id; - u32 clksel_val, base, timing[3]; + int index, flag = 0, err = 0;
- compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC; + index = host->dev_index;
- count = fdtdec_find_aliases_for_id(blob, "mmc", - compat_id, node_list, DWMMC_MAX_CH_NUM); + flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; + err = exynos_pinmux_config(host->dev_id, flag); + if (err) { + debug("DWMMC not configure\n"); + return err; + }
- for (i = 0; i < count; i++) { - int node = node_list[i]; - struct fdt_gpio_state pwr_gpio; + return exynos_dwmci_core_init(host, index); +}
- if (node <= 0) - continue; +static int exynos_dwmci_get_config(const void *blob, int node, + struct dwmci_host *host) +{ + int err = 0; + u32 base, clksel_val, timing[3];
- /* Extract device id for each mmc channel */ - dev_id = pinmux_decode_periph_id(blob, node); + /* Extract device id for each mmc channel */ + host->dev_id = pinmux_decode_periph_id(blob, node);
- /* Get the bus width from the device node */ - bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0); - if (bus_width <= 0) { - debug("DWMMC: Can't get bus-width\n"); - return -1; - } - if (8 == bus_width) - flag = PINMUX_FLAG_8BIT_MODE; - else - flag = PINMUX_FLAG_NONE; + /* Get the bus width from the device node */ + host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (host->buswidth <= 0) { + debug("DWMMC: Can't get bus-width\n"); + return -EINVAL; + }
- fdtdec_decode_gpio(blob, node, "pwr-gpios", &pwr_gpio); - if (fdt_gpio_isvalid(&pwr_gpio)) - gpio_direction_output(pwr_gpio.gpio, 1); + host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id); + if (host->dev_index == host->dev_id) + host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
- /* config pinmux for each mmc channel */ - err = exynos_pinmux_config(dev_id, flag); - if (err) { - debug("DWMMC not configured\n"); - return err; - } + /* Set the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { + debug("DWMMC: Can't get base address\n"); + return -EINVAL; + } + host->ioaddr = (void *)base;
- index = fdtdec_get_int(blob, node, "index", dev_id); - if (index == dev_id) - index = dev_id - PERIPH_ID_SDMMC0; + /* Extract the timing info from the node */ + err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3); + if (err) { + debug("Can't get sdr-timings for devider\n"); + return -EINVAL; + }
- /* Get the base address from the device node */ - base = fdtdec_get_addr(blob, node, "reg"); - if (!base) { - debug("DWMMC: Can't get base address\n"); - return -1; - } - /* Extract the timing info from the node */ - err = fdtdec_get_int_array(blob, node, "samsung,timing", - timing, 3); + clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | + DWMCI_SET_DRV_CLK(timing[1]) | + DWMCI_SET_DIV_RATIO(timing[2])); + if (clksel_val) + host->clksel_val = clksel_val; + + host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0); + host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0); + host->div = fdtdec_get_int(blob, node, "div", 0); + + return 0; +} + +static int exynos_dwmci_process_node(const void *blob, + int node_list[], int count) +{ + struct dwmci_host *host; + int i, node, err; + + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) + continue; + host = &dwmci_host[i]; + err = exynos_dwmci_get_config(blob, node, host); if (err) { - debug("Can't get sdr-timings for divider\n"); - return -1; + debug("%s: failed to decode dev %d\n", __func__, i); + return err; }
- clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | - DWMCI_SET_DRV_CLK(timing[1]) | - DWMCI_SET_DIV_RATIO(timing[2])); - /* Initialise each mmc channel */ - err = exynos_dwmci_add_port(index, base, bus_width, clksel_val); - if (err) - debug("dwmmc Channel-%d init failed\n", index); + do_dwmci_init(host); } return 0; } + +int exynos_dwmmc_init(const void *blob) +{ + int compat_id; + int node_list[DWMMC_MAX_CH_NUM]; + int err = 0, count; + + compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC; + + count = fdtdec_find_aliases_for_id(blob, "mmc", + compat_id, node_list, DWMMC_MAX_CH_NUM); + err = exynos_dwmci_process_node(blob, node_list, count); + + return err; +} #endif diff --git a/include/dwmmc.h b/include/dwmmc.h index c9bdf51..14c7db8 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -134,7 +134,9 @@ struct dwmci_host { unsigned int version; unsigned int clock; unsigned int bus_hz; + unsigned int div; int dev_index; + int dev_id; int buswidth; u32 clksel_val; u32 fifoth_val;