Add ethernet device tree node to support StarFive ethernet driver for the JH7110 RISC-V SoC.
Signed-off-by: Yanhong Wang yanhong.wang@starfivetech.com --- .../dts/jh7110-starfive-visionfive-2.dtsi | 34 +++++++++ arch/riscv/dts/jh7110.dtsi | 69 +++++++++++++++++++ 2 files changed, 103 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi index c6b6dfa940..0272369b24 100644 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi @@ -17,6 +17,8 @@ i2c2 = &i2c2; i2c5 = &i2c5; i2c6 = &i2c6; + ethernet0 = &gmac0; + ethernet1 = &gmac1; };
chosen { @@ -317,3 +319,35 @@ assigned-clock-parents = <&osc>; assigned-clock-rates = <0>; }; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; \ No newline at end of file diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi index bd60879615..58e332e9d7 100644 --- a/arch/riscv/dts/jh7110.dtsi +++ b/arch/riscv/dts/jh7110.dtsi @@ -235,6 +235,13 @@ #clock-cells = <0>; };
+ stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <4>; + snps,blen = <256 128 64 32 0 0 0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -539,6 +546,68 @@ status = "disabled"; };
+ gmac0: ethernet@16030000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16030000 0x0 0x10000>; + clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, + <&aoncrg JH7110_AONCLK_GMAC0_AHB>, + <&syscrg JH7110_SYSCLK_GMAC0_PTP>, + <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, + <&aoncrg JH7110_AONRST_GMAC0_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <7>, <6>, <5>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&aon_syscon 0xc 0x12>; + status = "disabled"; + }; + + gmac1: ethernet@16040000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, + <&syscrg JH7110_SYSCLK_GMAC1_AHB>, + <&syscrg JH7110_SYSCLK_GMAC1_PTP>, + <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, + <&syscrg JH7110_SYSRST_GMAC1_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <78>, <77>, <76>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&sys_syscon 0x90 0x2>; + status = "disabled"; + }; + aoncrg: clock-controller@17000000 { compatible = "starfive,jh7110-aoncrg"; reg = <0x0 0x17000000 0x0 0x10000>;