+Stefan
Hi,
On 13 September 2015 at 07:39, Marek Vasut marex@denx.de wrote:
On Sunday, September 13, 2015 at 10:32:09 AM, Thomas Chou wrote:
As the io space remapping ioremap() and bridge address translation fdt_translate_address() are not usually used in u-boot driver model by dev_get_addr(). We would better convert the reg address map in the device tree of nios2 boards, so that it is io mapped and bridge translated.
Signed-off-by: Thomas Chou thomas@wytron.com.tw
I'm not opposed.
btw. It might be just about time to split the DT bits into nios2.dtsi and nios2_3c120_devboard.dts , where the former would contain the generic bits of the binding and the later would only fill in the necessary address ranges and such. I do understand though, that the problem here might be that the hardware is just too flexible.
Please do check the patch under discussion here:
http://patchwork.ozlabs.org/patch/513313/
Does it solve your problem?
Regards, Simon