Hi Peter,
On 7 June 2017 at 19:12, Peter.Chubb@data61.csiro.au wrote:
"Peter" == Peter Chubb Peter.Chubb@data61.csiro.au writes: "Simon" == Simon Glass sjg@chromium.org writes:
Simon> Oh dear. I cannot find my board but will see if I can repeat Simon> this on a beaver.
Peter> If there's any additional logging you'd like me to collect on Peter> the Jetson, let me know.
I tried to reproduce this this morning. Today, even trying to exec the U-Boot without flashing fails.
The good news is I found my Jetson-TK1 and I can repeat your problem.
So, ./tegra-uboot-flasher exec jetson-tk1 with a current u-boot gives an inoperative eMMC.
In the boot header I see:
U-Boot 2017.05-00769-g0e513e788f (Jun 08 2017 - 09:26:27 +1000)
TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MMC: sdhci@700b0400: 1, sdhci@700b0600: 0
Then:
Tegra124 (Jetson TK1) # mmc rescan
Why are you running 'mmc rescan'? Is this because the MMC has changed?
This command does not seem to work since it does not re-probe the driver. It looks like the driver assumes that the controller is reset each time. I'll send a patch which seems to fix it for me.
tegra_mmc_send_cmd_bounced: MMC Timeout Interrupt status 0x00000001 Interrupt status enable 0xffff003b Interrupt signal enable 0xffff0002 Present status 0x01fb02f6 mmc_init: -1, time 8042
Peter C
Dr Peter Chubb Tel: +61 2 9490 5852 http://ts.data61.csiro.au/ Trustworthy Systems Group Data61 (formerly NICTA)
Regards, Simon