On 21. 07. 20 5:03, Heinrich Schuchardt wrote:
On 7/15/20 4:48 PM, Michal Simek wrote:
On 15. 07. 20 16:42, Heinrich Schuchardt wrote:
On 15.07.20 16:06, Michal Simek wrote:
On 15. 07. 20 15:23, Lukasz Majewski wrote:
Hi Heinrich,
On 15.07.20 13:24, Lukasz Majewski wrote:
>> Hi Heinrich, >> >>> Using UPDATE_TFTP the firmware can be updated from tFTP >>> by writing to NOR flash. The same is possible by defining >>> a dfu command in CONFIG_PREBOOT. >>> >>> The dfu command cannot only write to NOR but also to >>> other devices. In README.dfutfp UPDATE_TFTP has been >>> marked as deprecated. >> >> Could you also write in the proper README the steps >> necessary to have the same functionality as with >> UPDATE_TFTP with dfu and preboot? I think that it would be >> good to have it written down in ./doc. >>
doc/README.dfutftp already describes the necessary steps as:
- enable CONFIG_DFU_TFTP * enable CONFIG_PREBOOT * put a string
like "dfu tftp 0 mmc 0" into the "preboot" env variable
Do you want me to explicitly write that "dfu tftp 0 mtd 0" replaces the former auto-update functionality?
I am curious if that command is really dfu tftp 0 mtd 0.
Lukasz was asking about the replacement of the update that was executed when running with CONFIG_UPDATE_TFTP=y. This function that I am removing could only write to NOR flash. The update defined via CONFIG_PREBOOT is much more flexible and can server other storage media.
I have really not a problem with removing it.
The different accessible devices are described in doc/README.dfu. "ram" is one of them.
yes and link to README.dfutftp where only one options is listed as "dfu tftp 0 mmc 0" which is definitely only one option which you can use. Would be really good to list that options there and also retest them.
We will be able to have automated tests writing to the DFU "ram" and DFU "mtd" driver once the flash driver used by QEMU works properly. See
https://lists.denx.de/pipermail/u-boot/2020-July/420835.html mtd: cfi_flash: read device tree correctly
Do you plan to wire it with test/py framework and run it via travis/gitlab?
Thanks, Michal