On 06/01/2019 10:47 PM, Matwey V. Kornilov wrote:
Add build notes for Pine64 Rock64 board.
Signed-off-by: Matwey V. Kornilov matwey.kornilov@gmail.com
doc/README.rockchip | 30 ++++++++++++++++++++++++++++--
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip index ca4d6473b0..eacedbddf4 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -48,9 +48,10 @@ Two RK3036 boards are supported: - EVB RK3036 - use evb-rk3036 configuration - Kylin - use kylin_rk3036 configuration
-One RK3328 board is supported: +Two RK3328 board are supported:
- EVB RK3328
- EVB RK3328 - use evb-rk3328_defconfig
- Pine64 Rock64 board - use rock64-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
@@ -307,6 +308,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out truncate -s %2048 u-boot.bin cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on Pine64 Rock64 (RK3328) +=================================================
+For Rock64 rk3328 board the following three parts are required: +TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and +u-boot.itb are to be compiled as usual, TPL is currently not +implemented in u-boot, so you need to pick one from rkbin:
- Get the rkbin
- => git clone https://github.com/rockchip-linux/rkbin.git
- Create TPL/SPL image
- => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
- => cat spl/u-boot-spl.bin >> idbloader.img
- Write TPL/SPL image at 64 sector
- => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
- Write u-boot image tree blob at 16384 sector
- => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
Booting from an SD card on RK3399