Re: [PATCH v2 1/1] clk: clk-gpio: add actual gated clock

On 12/16/23 03:48, Svyatoslav Ryhel wrote:

Existing gpio-gate-clock driver acts like a simple GPIO switch without any effect on gated clock. Add actual clock actions into enable/disable ops and implement get_rate op by passing gated clock if it is enabled.

Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com

drivers/clk/clk-gpio.c | 44 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c index 26d795b978..72d9747a47 100644 --- a/drivers/clk/clk-gpio.c +++ b/drivers/clk/clk-gpio.c @@ -3,19 +3,23 @@

• Copyright (C) 2023 Marek Vasut marek.vasut+renesas@mailbox.org

*/

-#include <asm/gpio.h> -#include <common.h> -#include <clk-uclass.h> +#include <clk.h> #include <dm.h> +#include <clk-uclass.h> +#include <linux/clk-provider.h>

+#include <asm/gpio.h>

struct clk_gpio_priv {

• struct gpio_desc enable;

• struct gpio_desc enable; /* GPIO, controlling the gate */

• struct clk *clk; /* Gated clock */ };

  static int clk_gpio_enable(struct clk *clk) { struct clk_gpio_priv *priv = dev_get_priv(clk->dev);

• clk_enable(priv->clk); dm_gpio_set_value(&priv->enable, 1);

  return 0;

@@ -26,21 +30,45 @@ static int clk_gpio_disable(struct clk *clk) struct clk_gpio_priv *priv = dev_get_priv(clk->dev);

dm_gpio_set_value(&priv->enable, 0);

• clk_disable(priv->clk);

  return 0; }

+static ulong clk_gpio_get_rate(struct clk *clk) +{

• struct clk_gpio_priv *priv = dev_get_priv(clk->dev);
• return clk_get_rate(priv->clk);

+}

• const struct clk_ops clk_gpio_ops = { .enable = clk_gpio_enable, .disable = clk_gpio_disable,
• .get_rate = clk_gpio_get_rate, };

-static int clk_gpio_probe(struct udevice *dev) +static int clk_gpio_of_to_plat(struct udevice *dev) { struct clk_gpio_priv *priv = dev_get_priv(dev);

• int ret;

• return gpio_request_by_name(dev, "enable-gpios", 0,

• 		    &priv->enable, GPIOD_IS_OUT);
  

• priv->clk = devm_clk_get(dev, NULL);

• if (IS_ERR(priv->clk)) {

• log_debug("%s: Could not get gated clock: %ld\n",
  

• 	  __func__, PTR_ERR(priv->clk));
  

• return PTR_ERR(priv->clk);
  

• }

• ret = gpio_request_by_name(dev, "enable-gpios", 0,

• 		   &priv->enable, GPIOD_IS_OUT);
  

• if (ret) {

• log_debug("%s: Could not decode enable-gpios (%d)\n",
  

• 	  __func__, ret);
  

• return ret;
  

• }

• return 0; }

  /*

@@ -59,7 +87,7 @@ U_BOOT_DRIVER(gpio_gate_clock) = { .name = "gpio_clock", .id = UCLASS_CLK, .of_match = clk_gpio_match,

• .probe = clk_gpio_probe,

• .of_to_plat = clk_gpio_of_to_plat, .priv_auto = sizeof(struct clk_gpio_priv), .ops = &clk_gpio_ops, .flags = DM_FLAG_PRE_RELOC,

+CC Marek