I changed CFG_MAX_FLASH_BANKS from 2 to 1 soi am getting the message as Flash: 0 kB *** Warning - bad CRC, using default environment
and stops there.
On Tue, Jun 17, 2008 at 10:29 AM, navin karnam navin.karnam@gmail.com wrote:
Hi all,
I tried to debug why it is stopping after
DRAM Configuration: Bank #0: a0000000 64 MB Bank #1: a4000000 0 kB Bank #2: a8000000 0 kB Bank #3: ac000000 0 kB
It is unable to find the flash type; and control is not coming out of flash_init() function.
Regards, Naveen.
On Mon, Jun 16, 2008 at 1:35 PM, navin karnam navin.karnam@gmail.com wrote:
-- Hi all,
I am new to this list, I planned port u-boot on my board(pxa255), followed the procedure in README and i am able to compile the uboot.
I loaded the image on board. The messages i got when i boot the board are
U-Boot 0.4.5 (Jun 16 2008 - 12:24:00)
U-Boot code: A3000000 -> A301BD30 BSS: -> A301FE98 DRAM Configuration: Bank #0: a0000000 64 MB Bank #1: a4000000 0 kB Bank #2: a8000000 0 kB Bank #3: ac000000 0 kB
and it stops at that point. Please give me an hint where i am making the mistake.
Regards, Naveen
--
--