From: Peng Fan peng.fan@nxp.com
By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after we update the binman dtsi to drop 0x8000/0x4000 length for the firmware.
And that could save binary size for many KBs.
Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/ddr/imx/imx8m/helper.c | 45 ++++++++++++++++++++++++++++++---- 1 file changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/ddr/imx/imx8m/helper.c b/drivers/ddr/imx/imx8m/helper.c index f23904bf712..cd93d129dc0 100644 --- a/drivers/ddr/imx/imx8m/helper.c +++ b/drivers/ddr/imx/imx8m/helper.c @@ -4,6 +4,7 @@ */
#include <common.h> +#include <binman_sym.h> #include <log.h> #include <spl.h> #include <asm/global_data.h> @@ -25,6 +26,20 @@ DECLARE_GLOBAL_DATA_PTR; #define DMEM_OFFSET_ADDR 0x00054000 #define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
+binman_sym_declare(ulong, blob_ext_1, image_pos); +binman_sym_declare(ulong, blob_ext_1, size); + +binman_sym_declare(ulong, blob_ext_2, image_pos); +binman_sym_declare(ulong, blob_ext_2, size); + +#if !IS_ENABLED(CONFIG_IMX8M_DDR3L) +binman_sym_declare(ulong, blob_ext_3, image_pos); +binman_sym_declare(ulong, blob_ext_3, size); + +binman_sym_declare(ulong, blob_ext_4, image_pos); +binman_sym_declare(ulong, blob_ext_4, size); +#endif + /* We need PHY iMEM PHY is 32KB padded */ void ddr_load_train_firmware(enum fw_type type) { @@ -34,6 +49,7 @@ void ddr_load_train_firmware(enum fw_type type) unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0; unsigned long imem_start = (unsigned long)&_end + fw_offset; unsigned long dmem_start; + unsigned long imem_len = IMEM_LEN, dmem_len = DMEM_LEN;
#ifdef CONFIG_SPL_OF_CONTROL if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) { @@ -43,11 +59,30 @@ void ddr_load_train_firmware(enum fw_type type) } #endif
- dmem_start = imem_start + IMEM_LEN; + if (CONFIG_IS_ENABLED(BINMAN_SYMBOLS)) { + switch (type) { + case FW_1D_IMAGE: + imem_start = binman_sym(ulong, blob_ext_1, image_pos); + imem_len = binman_sym(ulong, blob_ext_1, size); + dmem_start = binman_sym(ulong, blob_ext_2, image_pos); + dmem_len = binman_sym(ulong, blob_ext_2, size); + break; + case FW_2D_IMAGE: +#if !IS_ENABLED(CONFIG_IMX8M_DDR3L) + imem_start = binman_sym(ulong, blob_ext_3, image_pos); + imem_len = binman_sym(ulong, blob_ext_3, size); + dmem_start = binman_sym(ulong, blob_ext_4, image_pos); + dmem_len = binman_sym(ulong, blob_ext_4, size); +#endif + break; + } + } + + dmem_start = imem_start + imem_len;
pr_from32 = imem_start; pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR; - for (i = 0x0; i < IMEM_LEN; ) { + for (i = 0x0; i < imem_len; ) { tmp32 = readl(pr_from32); writew(tmp32 & 0x0000ffff, pr_to32); pr_to32 += 4; @@ -59,7 +94,7 @@ void ddr_load_train_firmware(enum fw_type type)
pr_from32 = dmem_start; pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR; - for (i = 0x0; i < DMEM_LEN; ) { + for (i = 0x0; i < dmem_len; ) { tmp32 = readl(pr_from32); writew(tmp32 & 0x0000ffff, pr_to32); pr_to32 += 4; @@ -72,7 +107,7 @@ void ddr_load_train_firmware(enum fw_type type) debug("check ddr_pmu_train_imem code\n"); pr_from32 = imem_start; pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR; - for (i = 0x0; i < IMEM_LEN; ) { + for (i = 0x0; i < imem_len; ) { tmp32 = (readw(pr_to32) & 0x0000ffff); pr_to32 += 4; tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16); @@ -93,7 +128,7 @@ void ddr_load_train_firmware(enum fw_type type) debug("check ddr4_pmu_train_dmem code\n"); pr_from32 = dmem_start; pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR; - for (i = 0x0; i < DMEM_LEN;) { + for (i = 0x0; i < dmem_len;) { tmp32 = (readw(pr_to32) & 0x0000ffff); pr_to32 += 4; tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);