On Tue, Oct 31, 2023 at 1:18 AM Samuel Holland samuel@sholland.org wrote:
This series makes the necessary changes so 32-bit sunxi SoCs can load additional device trees or firmware from SPL along with U-Boot proper. Crust (SCP firmware) has support for A33 and H3, and H3 also needs to load an eGon blob to support CPU 0 hotplug (a silicon bug workaround).
FIT unlocks more features (signatures, multiple DTBs, etc.), so enable it by default. A10 (sun4i) only has 24 KiB of SRAM A1, so it needs SPL_FIT_IMAGE_TINY. For consistency, enable that option everywhere.
After this series is applied, we can increase SPL_MAX_SIZE for H6 and newer SoCs, both 32-bit (e.g. A50, T113) and 64-bit. I did not do that yet because there is some discussion to be had about the correct value: it must be adjusted to guarantee return-to-FEL functionality, and the exact adjustment depends on the sunxi-fel tool implementation.
Changes in v3:
- Rebased and collected tags
Changes in v2:
- Disable padding from SPL_PAD_TO
- Rely on binman min-size instead of using explicit offsets
- Use Kconfig for firmware addresses instead of an #ifdef staircase
Samuel Holland (4): sunxi: spl: Disable padding from SPL_PAD_TO sunxi: binman: Move BL31 and SCP firmware addresses to Kconfig sunxi: binman: Support FIT generation for 32-bit SoCs sunxi: Enable SPL FIT loading for 32-bit SoCs
arch/arm/Kconfig | 1 + arch/arm/dts/sunxi-u-boot.dtsi | 39 ++++++++++++++++++---------------- arch/arm/mach-sunxi/Kconfig | 17 +++++++++++++++ common/spl/Kconfig | 6 ++---- 4 files changed, 41 insertions(+), 22 deletions(-)
-- 2.41.0
Acked-by: Jesse Taube Mr.Bossman075@gmail.com
Looks good!