Dear Kim & Kumar,
many weeks ago in message 20111023095323.2087511F9E79@gemini.denx.de I wrote:
Dear Kumar Gala,
In message 2A6300E8-A874-49AC-84CB-BE681AF1BF90@freescale.com you wrote:
On Aug 26, 2011, at 1:32 PM, York Sun wrote:
Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c. The unified driver can initialize data using DDR controller. No need to use DMA if just to initialze for ECC.
Signed-off-by: York Sun yorksun@freescale.com Signed-off-by: Kim Phillips kim.phillips@freescale.com
board/freescale/mpc8349emds/Makefile | 1 + board/freescale/mpc8349emds/ddr.c | 107 +++++++++++++++++++++++++++++ board/freescale/mpc8349emds/mpc8349emds.c | 26 ++++--- include/configs/MPC8349EMDS.h | 16 ++++ 4 files changed, 139 insertions(+), 11 deletions(-) create mode 100644 board/freescale/mpc8349emds/ddr.c
applied to 85xx 'next'
Did you test it???
This patch breaks out-of-tree building of the MPC8349EMDS board:
- MAKEALL_LOGDIR=/work/wd/tmp-ppc-LOG
- BUILD_DIR=/work/wd/tmp-ppc
- ./MAKEALL MPC8349EMDS
Configuring for MPC8349EMDS board... make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. make: *** [depend] Error 2
[Local building works.]
Note also that "make distclean" still leaves a file arch/powerpc/cpu/mpc83xx/ddr-gen2.c
Please fix this, too.
Is anybody going to fix this? Or can I assume the board is dead and we can remove it?
Thanks.
Wolfgang Denk