Update this driver to use the new standard enums for speed.
Note: This driver needs to move to driver model.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: None
drivers/i2c/stm32f7_i2c.c | 43 +++++++++++++++------------------------ 1 file changed, 16 insertions(+), 27 deletions(-)
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index 2b18735fea..def84f2e0a 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -115,17 +115,6 @@ struct stm32_i2c_regs {
#define STM32_NSEC_PER_SEC 1000000000L
-#define STANDARD_RATE 100000 -#define FAST_RATE 400000 -#define FAST_PLUS_RATE 1000000 - -enum stm32_i2c_speed { - STM32_I2C_SPEED_STANDARD, /* 100 kHz */ - STM32_I2C_SPEED_FAST, /* 400 kHz */ - STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */ - STM32_I2C_SPEED_END, -}; - /** * struct stm32_i2c_spec - private i2c specification timing * @rate: I2C bus speed (Hz) @@ -164,7 +153,7 @@ struct stm32_i2c_spec { * @analog_filter: Analog filter delay (On/Off) */ struct stm32_i2c_setup { - enum stm32_i2c_speed speed; + enum i2c_speed_mode speed; u32 speed_freq; u32 clock_src; u32 rise_time; @@ -198,8 +187,8 @@ struct stm32_i2c_priv { };
static const struct stm32_i2c_spec i2c_specs[] = { - [STM32_I2C_SPEED_STANDARD] = { - .rate = STANDARD_RATE, + [IC_SPEED_MODE_STANDARD] = { + .rate = I2C_SPEED_STANDARD_RATE, .rate_min = 8000, .rate_max = 120000, .fall_max = 300, @@ -210,8 +199,8 @@ static const struct stm32_i2c_spec i2c_specs[] = { .l_min = 4700, .h_min = 4000, }, - [STM32_I2C_SPEED_FAST] = { - .rate = FAST_RATE, + [IC_SPEED_MODE_FAST] = { + .rate = I2C_SPEED_FAST_RATE, .rate_min = 320000, .rate_max = 480000, .fall_max = 300, @@ -222,8 +211,8 @@ static const struct stm32_i2c_spec i2c_specs[] = { .l_min = 1300, .h_min = 600, }, - [STM32_I2C_SPEED_FAST_PLUS] = { - .rate = FAST_PLUS_RATE, + [IC_SPEED_MODE_FAST_PLUS] = { + .rate = I2C_SPEED_FAST_PLUS_RATE, .rate_min = 800000, .rate_max = 1200000, .fall_max = 100, @@ -648,9 +637,9 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, struct list_head solutions; int ret;
- if (setup->speed >= STM32_I2C_SPEED_END) { + if (setup->speed >= IC_SPEED_MODE_HIGH) { pr_err("%s: speed out of bound {%d/%d}\n", __func__, - setup->speed, STM32_I2C_SPEED_END - 1); + setup->speed, IC_SPEED_MODE_FAST_PLUS); return -EINVAL; }
@@ -719,7 +708,7 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, if (ret) { debug("%s: failed to compute I2C timings.\n", __func__); - if (i2c_priv->speed > STM32_I2C_SPEED_STANDARD) { + if (i2c_priv->speed > IC_SPEED_MODE_STANDARD) { i2c_priv->speed--; setup->speed = i2c_priv->speed; setup->speed_freq = @@ -784,14 +773,14 @@ static int stm32_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus);
switch (speed) { - case STANDARD_RATE: - i2c_priv->speed = STM32_I2C_SPEED_STANDARD; + case I2C_SPEED_STANDARD_RATE: + i2c_priv->speed = IC_SPEED_MODE_STANDARD; break; - case FAST_RATE: - i2c_priv->speed = STM32_I2C_SPEED_FAST; + case I2C_SPEED_FAST_RATE: + i2c_priv->speed = IC_SPEED_MODE_FAST; break; - case FAST_PLUS_RATE: - i2c_priv->speed = STM32_I2C_SPEED_FAST_PLUS; + case I2C_SPEED_FAST_PLUS_RATE: + i2c_priv->speed = IC_SPEED_MODE_FAST_PLUS; break; default: debug("%s: Speed %d not supported\n", __func__, speed);