The platforms here have been removed, but the common code directory was forgotten. Clean up.
Signed-off-by: Tom Rini trini@konsulko.com --- board/xes/common/Makefile | 9 ----- board/xes/common/board.c | 67 -------------------------------- board/xes/common/fsl_8xxx_clk.c | 54 ------------------------- board/xes/common/fsl_8xxx_misc.c | 43 -------------------- board/xes/common/fsl_8xxx_misc.h | 11 ------ 5 files changed, 184 deletions(-) delete mode 100644 board/xes/common/Makefile delete mode 100644 board/xes/common/board.c delete mode 100644 board/xes/common/fsl_8xxx_clk.c delete mode 100644 board/xes/common/fsl_8xxx_misc.c delete mode 100644 board/xes/common/fsl_8xxx_misc.h
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile deleted file mode 100644 index b00accca1be0..000000000000 --- a/board/xes/common/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o -obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o -obj-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o -obj-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o diff --git a/board/xes/common/board.c b/board/xes/common/board.c deleted file mode 100644 index 053b07a0b70f..000000000000 --- a/board/xes/common/board.c +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <env.h> -#include "fsl_8xxx_misc.h" -#include <init.h> - -int checkboard(void) -{ - char name[] = CONFIG_SYS_BOARD_NAME; - char buf[64]; - char *s; - int i; - -#ifdef CONFIG_SYS_FORM_CUSTOM - s = "Custom"; -#elif CONFIG_SYS_FORM_6U_CPCI - s = "6U CompactPCI"; -#elif CONFIG_SYS_FORM_ATCA_PMC - s = "ATCA w/PMC"; -#elif CONFIG_SYS_FORM_ATCA_AMC - s = "ATCA w/AMC"; -#elif CONFIG_SYS_FORM_VME - s = "VME"; -#elif CONFIG_SYS_FORM_6U_VPX - s = "6U VPX"; -#elif CONFIG_SYS_FORM_PMC - s = "PMC"; -#elif CONFIG_SYS_FORM_PCI - s = "PCI"; -#elif CONFIG_SYS_FORM_3U_CPCI - s = "3U CompactPCI"; -#elif CONFIG_SYS_FORM_AMC - s = "AdvancedMC"; -#elif CONFIG_SYS_FORM_XMC - s = "XMC"; -#elif CONFIG_SYS_FORM_PMC_XMC - s = "PMC/XMC"; -#elif CONFIG_SYS_FORM_PCI_EXPRESS - s = "PCI Express"; -#elif CONFIG_SYS_FORM_3U_VPX - s = "3U VPX"; -#else -#error "Form factor not defined" -#endif - - name[strlen(name) - 1] += get_board_derivative(); - printf("Board: X-ES %s %s SBC\n", name, s); - - /* Display board specific information */ - puts(" "); - i = env_get_f("board_rev", buf, sizeof(buf)); - if (i > 0) - printf("Rev %s, ", buf); - i = env_get_f("serial#", buf, sizeof(buf)); - if (i > 0) - printf("Serial# %s, ", buf); - i = env_get_f("board_cfg", buf, sizeof(buf)); - if (i > 0) - printf("Cfg %s", buf); - puts("\n"); - - return 0; -} diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c deleted file mode 100644 index c36b2afd50ed..000000000000 --- a/board/xes/common/fsl_8xxx_clk.c +++ /dev/null @@ -1,54 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <clock_legacy.h> -#include <asm/io.h> - -/* - * Return SYSCLK input frequency - 50 MHz or 66 MHz depending on POR config - */ -unsigned long get_board_sys_clk(void) -{ -#if defined(CONFIG_MPC85xx) - volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); -#elif defined(CONFIG_MPC86xx) - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_gur_t *gur = &immap->im_gur; -#endif - - if (in_be32(&gur->gpporcr) & 0x10000) - return 66666666; - else -#ifdef CONFIG_ARCH_P2020 - return 100000000; -#else - return 50000000; -#endif -} - -#ifdef CONFIG_MPC85xx -/* - * Return DDR input clock - synchronous with SYSCLK or 66 MHz - * Note: 86xx doesn't support asynchronous DDR clk - */ -unsigned long get_board_ddr_clk(void) -{ - volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); - u32 ddr_ratio = (in_be32(&gur->porpllsr) & 0x00003e00) >> 9; - - if (ddr_ratio == 0x7) - return get_board_sys_clk(); - -#ifdef CONFIG_ARCH_P2020 - if (in_be32(&gur->gpporcr) & 0x20000) - return 66666666; - else - return 100000000; -#else - return 66666666; -#endif -} -#endif diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c deleted file mode 100644 index bc7e5c5764f8..000000000000 --- a/board/xes/common/fsl_8xxx_misc.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <asm/mmu.h> -#ifdef CONFIG_PCA953X -#include <pca953x.h> - -/* - * Determine if a board's flashes are write protected - */ -int board_flash_wp_on(void) -{ - if (pca953x_get_val(CFG_SYS_I2C_PCA953X_ADDR0) & - CONFIG_SYS_PCA953X_NVM_WP) - return 1; - - return 0; -} -#endif - -/* - * Return a board's derivative model number. For example: - * return 2 for the XPedite5372 and return 1 for the XPedite5201. - */ -uint get_board_derivative(void) -{ -#if defined(CONFIG_MPC85xx) - volatile ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR; -#elif defined(CONFIG_MPC86xx) - volatile immap_t *immap = (immap_t *)CFG_SYS_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; -#endif - - /* - * The top 4 lines of the local bus address are pulled low/high and - * can be read to determine the least significant digit of a board's - * model number. - */ - return gur->gpporcr >> 28; -} diff --git a/board/xes/common/fsl_8xxx_misc.h b/board/xes/common/fsl_8xxx_misc.h deleted file mode 100644 index 6e4858f15c39..000000000000 --- a/board/xes/common/fsl_8xxx_misc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - */ - -#ifndef __FSL_8XXX_MISC_H___ -#define __FSL_8XXX_MISC_H___ - -uint get_board_derivative(void); - -#endif /* __FSL_8XXX_MISC_H__ */