On 05/25/2017 05:12 PM, Ziyuan wrote:
hi Jaehoon,
On 05/16/2017 09:55 AM, Jaehoon Chung wrote:
Hi Ziyuan,
On 05/16/2017 10:15 AM, Ziyuan wrote:
hi Simon & Jaehoon,
On 05/16/2017 08:18 AM, Simon Glass wrote:
Hi Ziyuan,
On 15 May 2017 at 00:06, Ziyuan Xu xzy.xu@rock-chips.com wrote:
The original implementation select HS timing by default, add available type selection for higher speed mode compatibility, such as hs200, hs400, hs400es.
By the way, we assume that card run at 1.8V or 1.2V I/O when its timing is ddr52/hs200/hs400(es).
Signed-off-by: Ziyuan Xu xzy.xu@rock-chips.com
drivers/mmc/mmc.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- include/mmc.h | 16 +++++++++++++++ 2 files changed, 74 insertions(+), 1 deletion(-)
Is there a cover letter for this series, please?
This patchset is used for hs200/hs400/ddr52 mode of eMMC device, and fixes some bug for dw_mmc & sdhci controller. It's only valid in U-Boot stage, we still use 'High Speed' in SPL.
I tested it on evb-rk3288 board(eMMC 4.5) and evb-rk3388 board(eMMC 5.0).
I just reviewed an MMC series at add higher speed support. I'm not sure but I suspect these overlap.
Ha, I just reviewed Vignesh's patches, it focuses on uhs mode of sd card. It looks to me. But some details are not the same as mine. Anyway, what do you think?
I didn't review both yet..After checking, i will share my opinion. how about?
*ping*... Did you test this patchset on Samsung platform? As far as I know, Samsung SoCs also make use of dw_mmc and sdhci controllers.
Sorry for late..Sure I will test this..Thanks for kindly ping.
Best Regards, Jaehoon Chung
Regards, Simon