1 May
2015
1 May
'15
4:14 a.m.
Hi Vagrant,
On Thu, Apr 30, 2015 at 8:50 PM, Vagrant Cascadian vagrant@aikidev.net wrote:
So network works fine on the hummingboard i1 and i2ex, but the cubox i4pro is still inconsistant:
Net: Phy 0 not found PHY reset timed out FEC
When you see this error: does U-boot warn you about the MAC address stored in the environment does not match the one read by the fuses?
I think if you use a clean environment (env default -f -a, or do the setenv ethaddr; save) then the MAC address will be re-read from the fuse and stored in the env. Then ethernet should work fine.
Regards,
Fabio Estevam