Re: [U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P.

Hi Marcus,

Hello,

While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I face following issue with U-Boot SPL 2016.09-rc1 on it:

bash-4.3# cu -l /dev/cuaU0 -s 115200 Connected to /dev/cuaU0 (speed 115200)

U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from NAND ### ERROR ### Please RESET the board ###

Any ideas what change did cause this or where to start looking after?

I do not have any idea. What I can only recommend - please use last working release (2015.10) and perform git bisect.

Thanks, Marcus

Best regards, Lukasz Majewski