Hi Peter,
On Tue, 12 Mar 2024 at 15:13, Peter Robinson pbrobinson@gmail.com wrote:
Hi Sumit,
pcie_imx doesn't seem to share any useful code for iMX8MP SoC and it is rather tied to quite old port of pcie_designware driver from Linux which suffices only iMX6 specific needs.
But currently we have the common DWC specific bits which alligns pretty well with DW PCIe controller on iMX8MP SoC. So lets reuse those common bits instead as a new driver for iMX8 SoCs. It should be fairly easy to add support for other iMX8 variants to this driver.
The upstream Linux driver is moving towards a single driver [1] for imx6 -> imx9, would it be possible to add support for all generations to this driver and then remove the old driver?
Sorry but that's not in scope of this patch-set and neither do I possess boards with all the imx* SoC variants.
That would allow this single modern driver and removing the old imx6 specific driver.
Folks interested in this can build up on this patch-set and port other imx* variants and then we could have a single modern driver.
-Sumit
Peter
[1] https://www.spinics.net/lists/linux-pci/msg150359.html
iMX8MP SoC also comes up with standalone PCIe PHY support, so hence we can reuse the generic PHY infrastructure to power on PCIe PHY.
Testing with this patch-set included:
Verdin iMX8MP # pci enum PCIE-0: Link up (Gen1-x1, Bus0) Verdin iMX8MP # Verdin iMX8MP # nvme scan Verdin iMX8MP # Verdin iMX8MP # nvme info Device 0: Vendor: 0x126f Rev: T0828A0 Prod: AA000000000000000720 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Verdin iMX8MP # Verdin iMX8MP # load nvme 0 $loadaddr <file-name>
Changes in v3:
- Rebased on top of U-Boot next.
- Incorporated misc. updates to commit messages.
- New patch#2 to refactor reset driver function names.
- Patch#3: Refactored further for better code reuse.
- New patch#4 to fix refcount issue with power domain bus.
- Patch#5: Refactored further for better code reuse.
- Patch#7 & #8: Added dependency on REGMAP and SYSCON. Also, added support for vpcie-supply regulator.
- Patch#7 & #8: Added error paths and .remove callback.
- New patch#10 to enable PCIe/NVMe for imx8mp_venice*.
Changes in v2:
- Renamed PCIe IMX driver pcie_dw_imx8.c -> pcie_dw_imx.c.
- Added myself as maintainer for PCIe DWC IMX driver support.
- Incorporated various code and commit message improvement suggestions from Marek, thanks.
- Patch#3: Gate PCIe and USB clocks behind corresponding power domain IDs.
- Patch#4: Expose HSIO PLL clocks as a regular clock driver instead similar to what Linux kernel does.
- Patch#7: Picked up tags.
Sumit Garg (10): clk: imx8mp: Add support for PCIe clocks reset: imx: Refactor driver to simplify function names reset: imx: Add support for i.MX8MP reset controller imx8mp: power-domain: Don't power off pd_bus imx8mp: power-domain: Add PCIe support imx8mp: power-domain: Expose high performance PLL clock phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY pci: Add DW PCIe controller support for iMX8MP SoC verdin-imx8mp_defconfig: Enable PCIe/NVMe support MAINTAINERS: Add entry for PCIe DWC IMX driver
Tim Harvey (1): imx8mp_venice_defconfig: Enable PCIe/NVMe support
MAINTAINERS | 6 + configs/imx8mp_venice_defconfig | 8 + configs/verdin-imx8mp_defconfig | 6 + drivers/clk/imx/clk-imx8mp.c | 6 + drivers/pci/Kconfig | 11 + drivers/pci/Makefile | 1 + drivers/pci/pcie_dw_imx.c | 338 ++++++++++++++++++++++++++ drivers/phy/Kconfig | 11 + drivers/phy/Makefile | 1 + drivers/phy/phy-imx8m-pcie.c | 283 +++++++++++++++++++++ drivers/power/domain/imx8mp-hsiomix.c | 191 ++++++++++++--- drivers/reset/reset-imx7.c | 125 +++++++++- 12 files changed, 937 insertions(+), 50 deletions(-) create mode 100644 drivers/pci/pcie_dw_imx.c create mode 100644 drivers/phy/phy-imx8m-pcie.c
-- 2.34.1