Hi,
this patch was posted to patch tracking system and silently ignored... later on it was posted to ARM maintainer with the very same result...
Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. Once here, fix whitespaces and remove nowhere used struct bd_info_ext.
Signed-off-by: Ladislav Michl ladis@linux-mips.org
Fix U-Boot base address depending on CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8fad55d..ee0c395 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -152,8 +152,8 @@
#define CONFIG_HAS_DATAFLASH 1 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_MAX_DATAFLASH_PAGES 16384 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
@@ -174,11 +174,11 @@ #else #define CFG_ENV_IS_IN_FLASH 1 #ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ -#else #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ +#else +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ +#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #endif /* CFG_ENV_IS_IN_DATAFLASH */
@@ -186,44 +186,25 @@ #define CFG_LOAD_ADDR 0x21000000 /* default load address */
#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ -#define CFG_U_BOOT_BASE PHYS_FLASH_1 -#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -#else #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ +#else +#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ +#define CFG_U_BOOT_BASE PHYS_FLASH_1 +#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CFG_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - #define CFG_HZ 1000 #define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ + /* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 572a70f..3979dc2 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -139,7 +139,7 @@
#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ +#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
#define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 @@ -177,25 +177,6 @@ #define CFG_MAXARGS 32 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif /* __ASSEMBLY__ */ - #define CFG_HZ 1000 #define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ /* AT91C_TC_TIMER_DIV1_CLOCK */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 071d5b7..3f95d9a 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -158,8 +158,8 @@
#undef CONFIG_HAS_DATAFLASH #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 0 -#define CFG_MAX_DATAFLASH_PAGES 16384 +#define CFG_MAX_DATAFLASH_BANKS 0 +#define CFG_MAX_DATAFLASH_PAGES 16384 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
@@ -197,35 +197,16 @@
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
-#define CFG_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600 } +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - #define CFG_HZ 1000 #define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ + /* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 04f1f24..2d394a8 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -47,7 +47,7 @@
#define CFG_ATMEL_PLL_INIT_BUG 1 #ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CFG_USE_MAIN_OSCILLATOR 1 +#define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 #define MC_PUP_VAL 0x00000000 @@ -127,7 +127,7 @@ #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_NFS | \ @@ -136,7 +136,7 @@ #else #define CONFIG_COMMANDS \ ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB | \ @@ -156,7 +156,7 @@
#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
#define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 @@ -194,25 +194,6 @@ #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ #define LITTLEENDIAN 1 /* used by usb_ohci.c */
-#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif /* __ASSEMBLY__ */ - #define CFG_HZ 1000 #define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ /* AT91C_TC_TIMER_DIV1_CLOCK */