There are drivers to support built in USB controller and PHY-s now, so lets add the USB nodes to DTSI.
Signed-off-by: Robert Marko robert.marko@sartura.hr Cc: Luka Perkov luka.perkov@sartura.hr --- arch/arm/dts/qcom-ipq4019.dtsi | 76 ++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index 7b15df38d8..e0e4188e5d 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -90,5 +90,81 @@ gpio-bank-name="soc"; #gpio-cells = <2>; }; + + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&reset USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: hsphy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3: usb3@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + maximum-speed = "super-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + + usb2_hs_phy: hsphy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2: usb2@60f8800 { + compatible = "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; }; };