Use the standard BIT() macro to define BITS.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl --- include/axp209.h | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/include/axp209.h b/include/axp209.h index e1b22e3442..7803300328 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */
+#include <linux/bitops.h> + enum axp209_reg { AXP209_POWER_STATUS = 0x00, AXP209_CHIP_VERSION = 0x03, @@ -21,29 +23,29 @@ enum axp209_reg { AXP209_SHUTDOWN = 0x32, };
-#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) -#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4) +#define AXP209_POWER_STATUS_ON_BY_DC BIT(0) +#define AXP209_POWER_STATUS_VBUS_USABLE BIT(4)
-#define AXP209_OUTPUT_CTRL_EXTEN (1 << 0) -#define AXP209_OUTPUT_CTRL_DCDC3 (1 << 1) -#define AXP209_OUTPUT_CTRL_LDO2 (1 << 2) -#define AXP209_OUTPUT_CTRL_LDO4 (1 << 3) -#define AXP209_OUTPUT_CTRL_DCDC2 (1 << 4) -#define AXP209_OUTPUT_CTRL_LDO3 (1 << 6) +#define AXP209_OUTPUT_CTRL_EXTEN BIT(0) +#define AXP209_OUTPUT_CTRL_DCDC3 BIT(1) +#define AXP209_OUTPUT_CTRL_LDO2 BIT(2) +#define AXP209_OUTPUT_CTRL_LDO4 BIT(3) +#define AXP209_OUTPUT_CTRL_DCDC2 BIT(4) +#define AXP209_OUTPUT_CTRL_LDO3 BIT(6)
-#define AXP209_IRQ5_PEK_UP (1 << 6) -#define AXP209_IRQ5_PEK_DOWN (1 << 5) +#define AXP209_IRQ5_PEK_UP BIT(6) +#define AXP209_IRQ5_PEK_DOWN BIT(5)
-#define AXP209_POWEROFF (1 << 7) +#define AXP209_POWEROFF BIT(7)
/* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 -#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_GPIO0_CTRL 0x90 #define AXP_GPIO1_CTRL 0x92 #define AXP_GPIO2_CTRL 0x93 -#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ -#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ -#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x94 -#define AXP_GPIO_STATE_OFFSET 4 +#define AXP_GPIO_STATE_OFFSET 4