
Hi Eugen,
On 2023-03-31 11:40, Eugen Hristev wrote:
Add initial support for the rk3588 PHY variant. The driver now looks for phy-supply and enables/disables the vbus accordingly.
Maybe this should be added to core phy uclass to closer match linux?
Look like e.g. meson phy drivers also handle a phy-supply and could also benefit from having this in phy uclass instead of in each phy driver.
Regards, Jonas
The lookup for the host-port reg inside the struct now does a do {} while() instead of a while() {} in order to allow a first check for reg == 0.
Co-developed-by: Frank Wang frank.wang@rock-chips.com Signed-off-by: Frank Wang frank.wang@rock-chips.com Signed-off-by: Eugen Hristev eugen.hristev@collabora.com Tested-by: Vasily Khoruzhick anarsoul@gmail.com # rk3568-based board Tested-by: Xavier Drudis Ferran xdrudis@tinet.cat # rk3399 rock pi 4B+
Changes in v3:
- add handling of -EBUSY and -EALREADY for regulator return
Changes in v2:
- add handling of -EACCES
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 109 +++++++++++++++++- 1 file changed, 104 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 55e1dbcfef7e..75c50670524e 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -13,6 +13,7 @@ #include <dm/device_compat.h> #include <dm/lists.h> #include <generic-phy.h> +#include <power/regulator.h> #include <reset.h> #include <syscon.h> #include <asm/gpio.h> @@ -61,6 +62,7 @@ struct rockchip_usb2phy_cfg { struct rockchip_usb2phy { void *reg_base; struct clk phyclk;
- struct udevice *vbus_supply[USB2PHY_NUM_PORTS]; const struct rockchip_usb2phy_cfg *phy_cfg;
};
@@ -86,11 +88,34 @@ struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy) return &phy_cfg->port_cfgs[phy->id]; }
+static struct udevice *rockchip_usb2phy_check_vbus(struct phy *phy) +{
- struct udevice *parent = phy->dev->parent;
- struct rockchip_usb2phy *priv = dev_get_priv(parent);
- struct udevice *vbus = NULL;
- if (phy->id == USB2PHY_PORT_HOST)
vbus = priv->vbus_supply[USB2PHY_PORT_HOST];
- return vbus;
+}
static int rockchip_usb2phy_power_on(struct phy *phy) { struct udevice *parent = dev_get_parent(phy->dev); struct rockchip_usb2phy *priv = dev_get_priv(parent); const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
struct udevice *vbus = NULL;
int ret;
vbus = rockchip_usb2phy_check_vbus(phy);
if (vbus) {
ret = regulator_set_enable(vbus, true);
if (ret && ret != -EALREADY) {
dev_err(phy->dev, "vbus enable failed: %d\n", ret);
return ret;
}
}
property_enable(priv->reg_base, &port_cfg->phy_sus, false);
@@ -105,6 +130,17 @@ static int rockchip_usb2phy_power_off(struct phy *phy) struct udevice *parent = dev_get_parent(phy->dev); struct rockchip_usb2phy *priv = dev_get_priv(parent); const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
struct udevice *vbus = NULL;
int ret;
vbus = rockchip_usb2phy_check_vbus(phy);
if (vbus) {
ret = regulator_set_enable(vbus, false);
if (ret && ret != -EACCES && ret != -EBUSY) {
dev_info(phy->dev, "vbus disable failed: %d\n", ret);
return ret;
}
}
property_enable(priv->reg_base, &port_cfg->phy_sus, true);
@@ -149,13 +185,20 @@ static int rockchip_usb2phy_of_xlate(struct phy *phy, struct ofnode_phandle_args *args) { const char *name = phy->dev->name;
- struct udevice *parent = phy->dev->parent;
- struct rockchip_usb2phy *priv = dev_get_priv(parent);
- if (!strcasecmp(name, "host-port"))
- if (!strcasecmp(name, "host-port")) { phy->id = USB2PHY_PORT_HOST;
- else if (!strcasecmp(name, "otg-port"))
device_get_supply_regulator(phy->dev, "phy-supply",
&priv->vbus_supply[USB2PHY_PORT_HOST]);
- } else if (!strcasecmp(name, "otg-port")) { phy->id = USB2PHY_PORT_OTG;
- else
device_get_supply_regulator(phy->dev, "phy-supply",
&priv->vbus_supply[USB2PHY_PORT_OTG]);
} else { dev_err(phy->dev, "improper %s device\n", name);
}
return 0;
} @@ -201,14 +244,14 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
/* find out a proper config which can be matched with dt. */ index = 0;
- while (phy_cfgs[index].reg) {
do { if (phy_cfgs[index].reg == reg) { priv->phy_cfg = &phy_cfgs[index]; break; }
++index;
- }
} while (phy_cfgs[index].reg);
if (!priv->phy_cfg) { dev_err(dev, "failed find proper phy-cfg\n");
@@ -348,6 +391,58 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = { { /* sentinel */ } };
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
- {
.reg = 0x0000,
.port_cfgs = {
[USB2PHY_PORT_OTG] = {
.phy_sus = { 0x000c, 11, 11, 0, 1 },
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
}
},
- },
- {
.reg = 0x4000,
.port_cfgs = {
[USB2PHY_PORT_OTG] = {
.phy_sus = { 0x000c, 11, 11, 0, 0 },
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
}
},
- },
- {
.reg = 0x8000,
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0x0008, 2, 2, 0, 1 },
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
}
},
- },
- {
.reg = 0xc000,
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0x0008, 2, 2, 0, 1 },
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
}
},
- },
- { /* sentinel */ }
+};
static const struct udevice_id rockchip_usb2phy_ids[] = { { .compatible = "rockchip,rk3399-usb2phy", @@ -357,6 +452,10 @@ static const struct udevice_id rockchip_usb2phy_ids[] = { .compatible = "rockchip,rk3568-usb2phy", .data = (ulong)&rk3568_phy_cfgs, },
- {
.compatible = "rockchip,rk3588-usb2phy",
.data = (ulong)&rk3588_phy_cfgs,
- }, { /* sentinel */ }
};