This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/Kconfig | 5 - board/davedenx/qong/Kconfig | 15 -- board/davedenx/qong/MAINTAINERS | 6 - board/davedenx/qong/Makefile | 11 -- board/davedenx/qong/fpga.c | 77 ---------- board/davedenx/qong/lowlevel_init.S | 223 ---------------------------- board/davedenx/qong/qong.c | 259 --------------------------------- board/davedenx/qong/qong_fpga.h | 23 --- configs/qong_defconfig | 2 - include/configs/qong.h | 283 ------------------------------------ 10 files changed, 904 deletions(-) delete mode 100644 board/davedenx/qong/Kconfig delete mode 100644 board/davedenx/qong/MAINTAINERS delete mode 100644 board/davedenx/qong/Makefile delete mode 100644 board/davedenx/qong/fpga.c delete mode 100644 board/davedenx/qong/lowlevel_init.S delete mode 100644 board/davedenx/qong/qong.c delete mode 100644 board/davedenx/qong/qong_fpga.h delete mode 100644 configs/qong_defconfig delete mode 100644 include/configs/qong.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 511535c..2636db3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -229,10 +229,6 @@ config TARGET_IMX31_PHYCORE bool "Support imx31_phycore" select CPU_ARM1136
-config TARGET_QONG - bool "Support qong" - select CPU_ARM1136 - config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 @@ -836,7 +832,6 @@ source "board/compulab/cm_t43/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/creative/xfi3/Kconfig" -source "board/davedenx/qong/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/embest/mx6boards/Kconfig" diff --git a/board/davedenx/qong/Kconfig b/board/davedenx/qong/Kconfig deleted file mode 100644 index 76cf343..0000000 --- a/board/davedenx/qong/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_QONG - -config SYS_BOARD - default "qong" - -config SYS_VENDOR - default "davedenx" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "qong" - -endif diff --git a/board/davedenx/qong/MAINTAINERS b/board/davedenx/qong/MAINTAINERS deleted file mode 100644 index a275b5b..0000000 --- a/board/davedenx/qong/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -QONG BOARD -M: Wolfgang Denk wd@denx.de -S: Maintained -F: board/davedenx/qong/ -F: include/configs/qong.h -F: configs/qong_defconfig diff --git a/board/davedenx/qong/Makefile b/board/davedenx/qong/Makefile deleted file mode 100644 index 48c443d..0000000 --- a/board/davedenx/qong/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2009 -# Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := qong.o fpga.o -obj-y += lowlevel_init.o diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c deleted file mode 100644 index 2eaad1e..0000000 --- a/board/davedenx/qong/fpga.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/gpio.h> -#include <fpga.h> -#include <lattice.h> -#include "qong_fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_FPGA) - -static void qong_jtag_init(void) -{ - return; -} - -static void qong_fpga_jtag_set_tdi(int value) -{ - gpio_set_value(QONG_FPGA_TDI_PIN, value); -} - -static void qong_fpga_jtag_set_tms(int value) -{ - gpio_set_value(QONG_FPGA_TMS_PIN, value); -} - -static void qong_fpga_jtag_set_tck(int value) -{ - gpio_set_value(QONG_FPGA_TCK_PIN, value); -} - -static int qong_fpga_jtag_get_tdo(void) -{ - return gpio_get_value(QONG_FPGA_TDO_PIN); -} - -lattice_board_specific_func qong_fpga_fns = { - qong_jtag_init, - qong_fpga_jtag_set_tdi, - qong_fpga_jtag_set_tms, - qong_fpga_jtag_set_tck, - qong_fpga_jtag_get_tdo -}; - -Lattice_desc qong_fpga[CONFIG_FPGA_COUNT] = { - { - Lattice_XP2, - lattice_jtag_mode, - 356519, - (void *) &qong_fpga_fns, - NULL, - 0, - "lfxp2_5e_ftbga256" - }, -}; - -int qong_fpga_init(void) -{ - int i; - - fpga_init(); - - for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - fpga_add(fpga_lattice, &qong_fpga[i]); - } - return 0; -} - -#endif diff --git a/board/davedenx/qong/lowlevel_init.S b/board/davedenx/qong/lowlevel_init.S deleted file mode 100644 index 8887023..0000000 --- a/board/davedenx/qong/lowlevel_init.S +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2009, Emcraft Systems, Ilya Yanok yanok@emcraft.com - * - * Based on board/freescale/mx31ads/lowlevel_init.S - * by Guennadi Liakhovetski. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/imx-regs.h> - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.macro SETUP_RAM cfg, ctl - /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ - REG 0xB8001010, 0x00000004 - ldr r3, =\cfg - ldr r2, =WEIM_ESDCFG0 - str r3, [r2] - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - ldr r3, =\ctl - ldr r2, =WEIM_ESDCTL0 - str r3, [r2] - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - -.endm -/* RedBoot: To support 133MHz DDR */ -.macro init_drive_strength - /* - * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits - * in SW_PAD_CTL registers - */ - - /* SDCLK */ - ldr r1, =IOMUXC_SW_PAD_CTL(0x2b) - ldr r0, [r1, #0x6C] - bic r0, r0, #(1 << 12) - str r0, [r1, #0x6C] - - /* CAS */ - ldr r0, [r1, #0x70] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x70] - - /* RAS */ - ldr r0, [r1, #0x74] - bic r0, r0, #(1 << 2) - str r0, [r1, #0x74] - - /* CS2 (CSD0) */ - ldr r0, [r1, #0x7C] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x7C] - - /* DQM3 */ - ldr r0, [r1, #0x84] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x84] - - /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */ -pad_loop: - ldr r0, [r1, #0x88] - bic r0, r0, #(1 << 22) - bic r0, r0, #(1 << 12) - bic r0, r0, #(1 << 2) - str r0, [r1, #0x88] - add r1, r1, #4 - subs r2, r2, #0x1 - bne pad_loop -.endm /* init_drive_strength */ - -.globl lowlevel_init -lowlevel_init: - - init_drive_strength - - /* Image Processing Unit: */ - /* Too early to switch display on? */ - /* Switch on Display Interface */ - REG IPU_CONF, IPU_CONF_DI_EN - /* Clock Control Module: */ - REG CCM_CCMR, 0x074B0BF5 /* Use CKIH, MCU PLL off */ - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE /* MCU PLL on */ - /* Switch to MCU PLL */ - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - /* 399-133-66.5 */ - ldr r0, =CCM_BASE - ldr r1, =0xFF871650 - /* PDR0 */ - str r1, [r0, #0x4] - ldr r1, MPCTL_PARAM_399 - /* MPCTL */ - str r1, [r0, #0x10] - - /* Set UPLL=240MHz, USB=60MHz */ - ldr r1, =0x49FCFE7F - /* PDR1 */ - str r1, [r0, #0x8] - ldr r1, UPCTL_PARAM_240 - /* UPCTL */ - str r1, [r0, #0x14] - /* default CLKO to 1/8 of the ARM core */ - mov r1, #0x00000208 - /* COSR */ - str r1, [r0, #0x1c] - - /* Default: 1, 4, 12, 1 */ - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - -check_ddr_module: -/* Set stackpointer in internal RAM to call get_ram_size */ - ldr sp, =(IRAM_BASE_ADDR + IRAM_SIZE - 16) - stmfd sp!, {r0-r11, ip, lr} - mov ip, lr /* save link reg across call */ - - ldr r0,=0x08000000 - SETUP_RAM ESDCFG0_256MB, ESDCTL0_256MB - ldr r0,=0x80000000 - ldr r1,=0x10000000 - bl get_ram_size - ldr r1,=0x10000000 - cmp r0,r1 - beq restore_regs - SETUP_RAM ESDCFG0_128MB, ESDCTL0_128MB - ldr r0,=0x80000000 - ldr r1,=0x08000000 - bl get_ram_size - ldr r1,=0x08000000 - cmp r0,r1 - beq restore_regs - -restore_regs: - ldmfd sp!, {r0-r11, ip, lr} - mov lr, ip /* restore link reg */ - - mov pc, lr - - -MPCTL_PARAM_399: - .word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0)) -UPCTL_PARAM_240: - .word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3 << 0)) - - .equ ESDCFG0_128MB, \ - (0 << 21) + /* tXP */ \ - (1 << 20) + /* tWTR */ \ - (2 << 18) + /* tRP */ \ - (1 << 16) + /* tMRD */ \ - (0 << 15) + /* tWR */ \ - (5 << 12) + /* tRAS */ \ - (1 << 10) + /* tRRD */ \ - (3 << 8) + /* tCAS */ \ - (2 << 4) + /* tRCD */ \ - (0x0F << 0) /* tRC */ - - .equ ESDCTL0_128MB, \ - (1 << 31) + /* enable */ \ - (0 << 28) + /* mode */ \ - (0 << 27) + /* supervisor protect */ \ - (2 << 24) + /* 13 rows */ \ - (2 << 20) + /* 10 cols */ \ - (2 << 16) + /* 32 bit */ \ - (3 << 13) + /* 7.81us (64ms/8192) */ \ - (0 << 10) + /* power down timer */ \ - (0 << 8) + /* full page */ \ - (1 << 7) + /* burst length */ \ - (0 << 0) /* precharge timer */ - - .equ ESDCFG0_256MB, \ - (3 << 21) + /* tXP */ \ - (0 << 20) + /* tWTR */ \ - (2 << 18) + /* tRP */ \ - (1 << 16) + /* tMRD */ \ - (0 << 15) + /* tWR */ \ - (5 << 12) + /* tRAS */ \ - (1 << 10) + /* tRRD */ \ - (3 << 8) + /* tCAS */ \ - (2 << 4) + /* tRCD */ \ - (7 << 0) /* tRC */ - - .equ ESDCTL0_256MB, \ - (1 << 31) + \ - (0 << 28) + \ - (0 << 27) + \ - (3 << 24) + /* 14 rows */ \ - (2 << 20) + /* 10 cols */ \ - (2 << 16) + \ - (4 << 13) + /* 3.91us (64ms/16384) */ \ - (0 << 10) + \ - (0 << 8) + \ - (1 << 7) + \ - (0 << 0) diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c deleted file mode 100644 index ad1694b..0000000 --- a/board/davedenx/qong/qong.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * - * (c) 2009 Emcraft Systems, Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <nand.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <asm/gpio.h> -#include "qong_fpga.h" -#include <watchdog.h> -#include <errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -static void qong_fpga_reset(void) -{ - gpio_set_value(QONG_FPGA_RST_PIN, 0); - udelay(30); - gpio_set_value(QONG_FPGA_RST_PIN, 1); - - udelay(300); -} - -int board_early_init_f(void) -{ -#ifdef CONFIG_QONG_FPGA - /* CS1: FPGA/Network Controller/GPIO, 16-bit, no DTACK */ - static const struct mxc_weimcs cs1 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 1), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(2, 0, 0, 4, 0, 0, 5, 0, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 4, 0, 2, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(1, &cs1); - - /* setup pins for FPGA */ - mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO)); - - /* FPGA reset Pin */ - /* rstn = 0 */ - gpio_direction_output(QONG_FPGA_RST_PIN, 0); - - /* set interrupt pin as input */ - gpio_direction_input(QONG_FPGA_IRQ_PIN); - - /* FPGA JTAG Interface */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO)); - gpio_direction_output(QONG_FPGA_TCK_PIN, 0); - gpio_direction_output(QONG_FPGA_TMS_PIN, 0); - gpio_direction_output(QONG_FPGA_TDI_PIN, 0); - gpio_direction_input(QONG_FPGA_TDO_PIN); -#endif - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* setup pins for SPI (pmic) */ - mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); - mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); - mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); - mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); - mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); - - /* Setup pins for USB2 Host */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_CLK, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DIR, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_NXT, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_STP, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA0, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA1, MUX_CTL_FUNC)); - -#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - - mx31_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ - mx31_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ - mx31_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ - mx31_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ - mx31_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ - mx31_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ - mx31_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ - mx31_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ - - mx31_set_gpr(MUX_PGP_UH2, 1); - - return 0; - -} - -int board_init(void) -{ - /* Chip selects */ - /* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */ - /* Assumptions: HCLK = 133 MHz, tACC = 130ns */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 21, 0, 0, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(0, 1, 3, 3, 1, 1, 5, 1, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 1, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(0, &cs0); - - /* board id for linux */ - gd->bd->bi_arch_number = MACH_TYPE_QONG; - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - qong_fpga_init(); - - return 0; -} - -int board_late_init(void) -{ - u32 val; - struct pmic *p; - int ret; - - ret = pmic_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("FSL_PMIC"); - if (!p) - return -ENODEV; - /* Enable RTC battery */ - pmic_reg_read(p, REG_POWER_CTL0, &val); - pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); - pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); - -#ifdef CONFIG_HW_WATCHDOG - hw_watchdog_init(); -#endif - - return 0; -} - -int checkboard(void) -{ - printf("Board: DAVE/DENX Qong\n"); - return 0; -} - -int misc_init_r(void) -{ -#ifdef CONFIG_QONG_FPGA - u32 tmp; - - tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION; - printf("FPGA: "); - printf("version register = %u.%u.%u\n", - (tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF); -#endif - return 0; -} - -int board_eth_init(bd_t *bis) -{ -#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET) - return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1); -#else - return 0; -#endif -} - -#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT) -static void board_nand_setup(void) -{ - /* CS3: NAND 8-bit */ - static const struct mxc_weimcs cs3 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 1, 15, 0, 0, 0), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(2, 0, 0, 1, 3, 1, 3, 3, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 0, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(3, &cs3); - - mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1); - - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_RB, MUX_CTL_IN_GPIO)); - - /* Make sure to reset the fpga else you cannot access NAND */ - qong_fpga_reset(); - - /* Enable NAND flash */ - gpio_set_value(15, 1); - gpio_set_value(14, 1); - gpio_direction_output(15, 0); - gpio_direction_input(16); - gpio_direction_input(14); - -} - -int qong_nand_rdy(void *chip) -{ - udelay(1); - return gpio_get_value(16); -} - -void qong_nand_select_chip(struct mtd_info *mtd, int chip) -{ - if (chip >= 0) - gpio_set_value(15, 0); - else - gpio_set_value(15, 1); - -} - -void qong_nand_plat_init(void *chip) -{ - struct nand_chip *nand = (struct nand_chip *)chip; - nand->chip_delay = 20; - nand->select_chip = qong_nand_select_chip; - nand->options &= ~NAND_BUSWIDTH_16; - board_nand_setup(); -} - -#endif diff --git a/board/davedenx/qong/qong_fpga.h b/board/davedenx/qong/qong_fpga.h deleted file mode 100644 index 2a619f7..0000000 --- a/board/davedenx/qong/qong_fpga.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * - * (c) 2009 Emcraft Systems, Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef QONG_FPGA_H -#define QONG_FPGA_H - -#define QONG_FPGA_CTRL_BASE CONFIG_FPGA_BASE -#define QONG_FPGA_CTRL_VERSION (QONG_FPGA_CTRL_BASE + 0x00000000) -#define QONG_FPGA_PERIPH_SIZE (1 << 24) - -#define QONG_FPGA_TCK_PIN 26 -#define QONG_FPGA_TMS_PIN 25 -#define QONG_FPGA_TDI_PIN 8 -#define QONG_FPGA_TDO_PIN 7 -#define QONG_FPGA_RST_PIN 48 -#define QONG_FPGA_IRQ_PIN 40 - -int qong_fpga_init(void); -#endif /* QONG_FPGA_H */ diff --git a/configs/qong_defconfig b/configs/qong_defconfig deleted file mode 100644 index fddd836..0000000 --- a/configs/qong_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_QONG=y diff --git a/include/configs/qong.h b/include/configs/qong.h deleted file mode 100644 index f34a54f..0000000 --- a/include/configs/qong.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, yanok@emcraft.com - * - * Configuration settings for the Dave/DENX QongEVB-LITE board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_MX31 /* This is a mx31 */ -#define CONFIG_QONG - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1536 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -#define CONFIG_MXC_GPIO -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG - -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_RTC_MC13XXX - -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 100000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 - -/* FPGA */ -#define CONFIG_FPGA -#define CONFIG_QONG_FPGA -#define CONFIG_FPGA_BASE (CS1_BASE) -#define CONFIG_FPGA_LATTICE -#define CONFIG_FPGA_COUNT 1 - -#ifdef CONFIG_QONG_FPGA -/* Ethernet */ -#define CONFIG_DNET -#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) - -/* Framebuffer and LCD */ -#define CONFIG_VIDEO -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_MX3 -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) - -/* USB */ -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_MXC -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORT 2 -#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT) -#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#endif /* CONFIG_CMD_USB */ - -/* - * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the - * initial TFTP transfer, should the user wish one, significantly. - */ -#define CONFIG_ARP_TIMEOUT 200UL - -#endif /* CONFIG_QONG_FPGA */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_UNZIP - -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "uboot_addr=A0000000\0" \ - "kernel_addr=A00C0000\0" \ - "ramdisk_addr=A0300000\0" \ - "u-boot=qong/u-boot.bin\0" \ - "kernel_addr_r=80800000\0" \ - "hostname=qong\0" \ - "bootfile=qong/uImage\0" \ - "rootpath=/opt/eldk-4.2-arm/armVFP\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run flash_self\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ - " +${filesize};cp.b ${fileaddr} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000," \ - "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296," \ - "vmode:0\0" \ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on first 255MB of RAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0xff000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ - -#define CONFIG_MISC_INIT_R - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ - -/* - * NAND driver - */ - -#ifndef __ASSEMBLY__ -extern void qong_nand_plat_init(void *chip); -extern int qong_nand_rdy(void *chip); -#endif -#define CONFIG_NAND_PLAT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CS3_BASE -#define NAND_PLAT_INIT() qong_nand_plat_init(nand) - -#define QONG_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 24)) -#define QONG_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 23)) -#define QONG_NAND_WRITE(addr, cmd) \ - do { \ - __REG8(addr) = cmd; \ - } while (0) - -#define NAND_PLAT_WRITE_CMD(chip, cmd) QONG_NAND_WRITE(QONG_NAND_CLE(chip), cmd) -#define NAND_PLAT_WRITE_ADR(chip, cmd) QONG_NAND_WRITE(QONG_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (qong_nand_rdy(chip)) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 -/* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -#define CONFIG_SYS_FLASH_CFI -/* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_CFI_DRIVER -/* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -/* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * Filesystem - */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0," \ - "nand0=gen_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "512k(U-Boot),128k(env1),128k(env2)," \ - "2304k(kernel),13m(ramdisk),-(user);" \ - "gen_nand:" \ - "128m(nand)" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_BOARD_EARLY_INIT_F - -#endif /* __CONFIG_H */