From: Vladimir Oltean vladimir.oltean@nxp.com
DSA stands for Distributed Switch Architecture and it is a subsystem introduced in the Linux kernel to support switches that: - have an Ethernet link up to the CPU - use some form of tagging to identify the source/destination port for Rx/Tx - may be cascaded in tree-like structures.
DSA is described in depth here: https://www.kernel.org/doc/Documentation/networking/dsa/dsa.txt
This patch set introduces a DSA class in U-Boot to support drivers of DSA switches. DSA drivers have to implement the following ops: - enable/disable of switch ports, - insert a tag in frames being transmitted, used by the switch to select the egress port, - parse a tag in frames being received, used for Rx traffic.
DSA class code deals with presentation of switch ports as Ethernet interfaces, deals with the master Ethernet device for I/O and helps with parsing of the DT assuming the structure follows the DSA kernel binding.
Support for switch cascading is not included yet.
In the sandbox environment, the DSA sandbox driver, the switch ports and master eth interface look like this: => dm tree Class Index Probed Driver Name ----------------------------------------------------------- [...] eth 4 [ + ] eth_sandbox |-- dsa-test-eth dsa 0 [ + ] dsa_sandbox |-- dsa-test eth 5 [ + ] dsa-port | |-- lan0 eth 6 [ + ] dsa-port | `-- lan1
=> setenv ethact lan1 => ping 1.2.3.5 Using lan1 device host 1.2.3.5 is alive =>
This patch set also introduces a driver for the Ethernet switch integrated into NXP LS1028A, called Felix. The switch has 4 front panel ports, I/O to/from it is done though an ENETC Ethernet interface and meta-data is carried between the switch and the driver though an additional header pre-pended to the original frame. Network commands like tftp can be used on these front panel ports. The ports are disabled unless used so they do not cause issues on network topologies that include loops.
Felix as seen on LS1028A RDB: => dm tree Class Index Probed Driver Name ----------------------------------------------------------- [...] dsa 0 [ + ] felix-switch | |-- felix-switch eth 4 [ + ] dsa-port | | |-- swp0 eth 5 [ + ] dsa-port | | |-- swp1 eth 6 [ + ] dsa-port | | |-- swp2 eth 7 [ + ] dsa-port | | `-- swp3
=> mdio list [...] 10 - Vitesse VSC8514 <--> swp0 11 - Vitesse VSC8514 <--> swp1 12 - Vitesse VSC8514 <--> swp2 13 - Vitesse VSC8514 <--> swp3
NOTE: This patchset is a major rework of the dsa-class code since the last submission from May 5th: https://patchwork.ozlabs.org/project/uboot/cover/1588700588-8587-1-git-send-... The basic concepts and data path operation (tagging) in the DSA class code remain the same as in the initial patchset from Alex, however the external API has been changed significantly (simplified), the driver model integration has been improved to the point that the DSA class code no longer needs to allocate extra memory internally (via malloc), reduced memory footprint, internal state data moved from the external API and internalized, cleaner external API, internal code reworked, completely reworked DSA sandbox driver and unit tests for better coverage and to integrate better with the eth sandbox driver and tests, etc.
v5: Fix the DSA driver not probing in the sandbox, and the net_retry test failing due to that: - Made PHY_FIXED work with live OF. - Made DSA user ports [ not just CPU ports as before ], and any other callers of dm_eth_phy_connect, work with fixed-link.
v4: - Implemented the TODO for having a phy_device on the CPU port. - Enabled CONFIG_PHY_FIXED which is a new dependency of CONFIG_DM_DSA.
v3: - Removed all infrastructure associated with dsa_foreach_port, which is no longer needed. - Only inherit the DSA master's MAC address if the environment does not already have a specific MAC address that should be used for the DSA port. - Be compatible with the new "ethernet-ports" container name which has been introduced in the Linux kernel as commit 85e05d263ed2 ("net: dsa: of: Allow ethernet-ports as encapsulating node") in v5.9. - Fixed the felix driver not getting its ports initialized, due to dsa_foreach_port() being actually unusable when called from the probe function of the DSA udevice - the eth port udevices are _not_ yet probed at that point. We are now initializing all ports from the .port_enable() callback of each eth udevice. - Deleted the unit tests associated with the infrastructure for dsa_foreach_port, since that function no longer exists. - Enabled the config options for the Kontron LS1028A board too.
v2: Switch node structure defined in dtsi now consistent with the Linux switch node definition. Moved aliases from dtsi to the RDB dts to minimize impact on other boards (and for improved flexibility).
Alex Marginean (3): drivers: net: add Felix DSA switch driver arm: dts: ls1028a: add Ethernet switch node and dependencies configs: ls1028a: enable the Ethernet switch driver
Claudiu Manoil (2): net: introduce DSA class for Ethernet switches sandbox: add a DSA sandbox driver and unit test
Vladimir Oltean (4): net: phy: fixed: be compatible with live OF tree net: phy: fixed: support speeds of 2500 and 10000 net: phy: introduce fixed_phy_create for DSA CPU ports net: mdio: teach dm_eth_connect_phy_handle to connect to fixed PHY
arch/Kconfig | 2 + arch/arm/dts/fsl-ls1028a-rdb.dts | 64 +++ arch/arm/dts/fsl-ls1028a.dtsi | 55 ++- arch/sandbox/dts/test.dts | 48 ++ configs/kontron_sl28_defconfig | 3 + configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 3 + configs/ls1028aqds_tfa_defconfig | 3 + configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 3 + configs/ls1028ardb_tfa_defconfig | 3 + drivers/net/Kconfig | 24 + drivers/net/Makefile | 1 + drivers/net/dsa_sandbox.c | 179 +++++++ drivers/net/fsl_enetc.h | 5 + drivers/net/mscc_eswitch/Kconfig | 8 + drivers/net/mscc_eswitch/Makefile | 1 + drivers/net/mscc_eswitch/felix_switch.c | 414 ++++++++++++++++ drivers/net/phy/fixed.c | 34 +- drivers/net/phy/phy.c | 59 ++- include/configs/sandbox.h | 2 + include/dm/uclass-id.h | 1 + include/net.h | 6 + include/net/dsa.h | 165 +++++++ include/phy.h | 21 + net/Makefile | 1 + net/dsa-uclass.c | 478 +++++++++++++++++++ net/mdio-uclass.c | 12 +- test/dm/Makefile | 1 + test/dm/dsa.c | 82 ++++ test/dm/eth.c | 10 +- 29 files changed, 1660 insertions(+), 28 deletions(-) create mode 100644 drivers/net/dsa_sandbox.c create mode 100644 drivers/net/mscc_eswitch/felix_switch.c create mode 100644 include/net/dsa.h create mode 100644 net/dsa-uclass.c create mode 100644 test/dm/dsa.c